Spare Parts
Filter by
Filter by
Showing 193–204 of 661 results
-
DIN Dust Cover Cup-Waterproof
7,49 € + VAT Add to cartPlastic Waterproof DIN Protective Cup cover for 1st stages
This 1st DIN dust cup cover protects regulators against contaminants and water.
In stock
-
DIN Filter retainer for Scubapro 1st Stage as part no 10.400.122
12,00 € + VAT Read moreDIN Filter retainer for Scubapro 1st Stage gear as part no: 10.400.122
Out of stock
-
DIN Protector G5/8 Transpot Plug – with presure release
25,99 € + VAT Read moreThis DIN protector plug prevents any damage to the DIN scuba tank valves, which are usually caused by impacts during a transfer of scuba tanks prior to and after diving. Pressure release is a must on those plugs, since if by mistake you pressurize the valve while the plug is fitted, then is very complicated to remove the plug, and most likely the diving activity will be canceled.
Out of stock
-
DIN to Yoke inserts for scuba tank Valves
7,50 € + VAT Add to cartYoke to DIN inserts for scuba tank Valves
- G5/8, 1/4″ Hex, Chromed brass inserts
In stock
-
DIN to Yoke Universal Adaptor 232bar for DIN Scuba Regulators
49,00 € + VAT Add to cartUniversal Scuba Adaptor 232bar DIN to Yoke.
Only 1 left in stock
-
Disc sintered Air filter for Mares 1st Stage 46185014
3,99 € + VAT Add to cartDisc Air sintered filter for Mares 1st Stage as part no 46185014
- Disc bronze nickel-plated filter for 1st stages Mares gear.
- Dimensions: 1.48 mm thickness x 12.6mm Diameter
In stock
-
Disc sintered Air filter for Mares 1st Stage DIN 183053
2,45 € + VAT Add to cartDisc sintered Air filter for Mares 1st Stage DIN 183053
- Disc bronze nickel-plated filter for 1st stages Mares gear.
- Dimensions: 2 mm thickness x 9.00mm Diameter
In stock
-
Dive Switch for Scubapro A700 as part no 11.700.107
16,99 € + VAT Add to cartDive Switch for Scubapro A700 as part no 11.700.107
In stock
-
Dump Valve Membrane for Aqua Φ 33.5mm x 3.00 mm thickness as part no 15714
2,99 € + VAT Add to cart- Dump Valve Membrane for Aqua BC Φ 33.5mm x 3.00 mm thickness as part no: 15714
- Dimensions: Diameter Φ 33.5mm x 3.00 mm thickness
In stock
-
EPDM 70Sh Orings for APE SG 1154, Aqua SG 444243
12,95 € + VAT Add to cartO-rings for APE and Aqua scuba gear
- Qty: 50 O-rings
- Used for Regulator hose: swivel end; Piston barrel HP seal; 2nd stage orifice seal; Valve stem seals; Early calypso Regulators; Power inflators stems;
- As MARES part no: SG-46110205
- as rg911744
Only 2 left in stock
-
EPDM O-rings 70Sh for Apeks as part no ap1267 and 124706
12,99 € + VAT Add to cartEPDM O-rings 70Sh for Apeks and Aqualung
- As part no ap1267 , 124706 , rg911455
- Qty: 50 O-rings
- Used for 1st stage inlet fittings; HP seal retainer seal; J valve module; Valve HP plugs; 2nd stage barrel and housing plug seals
In stock
-
EPDM O-rings as Scubapro part no: 01.050.108
10,50 € + VAT Add to cartEPDM O-rings as Scubapro part no: 01.050.108
- Qty: 50 O-rings
- Similar to Scubapro part 01.050.108
Only 2 left in stock
PAYMENT METHODS
We Accept All Major Credit Cards Securely Online.
Express Shipping
Express shipping available with delivery time 3-5 days.
© scubagaskets.com - Premium ORings Provider. All Rights Reserved
Powered By Novel Digital