Scuba Tank Valves
Filter by
Filter by
Showing 1–12 of 17 results
-
215 Scuba O-Rings NBR 70Sh
18,99 € + VAT Add to cart215 Scuba O-Rings NBR 70Sh
- Qty: 50 O-rings
- ID X CS : 26,58 X 3,53 mm
- Used for valve Tank Neck 3/4
In stock
-
CCR In line Scuba Tank Valve M25-DIN
49,99 € + VAT Add to cartCCR In-Line Scuba Tank Valve M25-DIN
***Last piece***Only 1 left in stock
-
Digital IP 2nd Stage Regulator Tester Gauge 8.5-10 Bar -125-150 psi
90,00 € + VAT Add to cartDigital IP 2nd stage tester Gauge 8.5-10 Bar -125-150 psi
- Operation pressure: 0-300psa (0-20 bar)
- Mesure units options: psi, bar, Kpa, Kgf/cm2
- Powerd by 2 x 1.5V AAA batteries
- Accuracy: ± 1% at 25C
Only 1 left in stock (can be backordered)
- Operation pressure: 0-300psa (0-20 bar)
-
DIN 300 bar Male Adapter to DIN 200 bar Female
29,99 € + VAT Add to cartDIN 300 bar Male Adapter to DIN 200 bar Female
Only 3 left in stock
-
DIN Dust Cover Cup-Waterproof
7,49 € + VAT Add to cartPlastic Waterproof DIN Protective Cup cover for 1st stages
This 1st DIN dust cup cover protects regulators against contaminants and water.
In stock
-
DIN Protector G5/8 Transpot Plug – with presure release
35,99 € + VAT Add to cartThis DIN protector plug prevents any damage to the DIN scuba tank valves, which are usually caused by impacts during a transfer of scuba tanks prior to and after diving. Pressure release is a must on those plugs, since if by mistake you pressurize the valve while the plug is fitted, then is very complicated to remove the plug, and most likely the diving activity will be canceled.
Only 1 left in stock
-
External Thread Valve GO Tool G5/8×14 tpi tol A for DIN regulators
149,99 € + VAT Add to cartGo Tool for DIN external threads of regulators
**Made in Germany**
Only 1 left in stock
-
External Thread Valve NO-GO Tool G5/8 x14 tpi tol A
149,99 € + VAT Add to cartNO-GO Tool G5/8×14 tpi tol A. (For DIN thread inspection)
**Made in Germany**Only 1 left in stock
-
Heavy Duty Scuba Tank Valve Removal Tool **Updated**
45,99 € + VAT Add to cartHeavy duty Nickel Plated scuba tank valve removal tool
Net weight: 543 gr
In stock
-
Internal Circlip Pliers
18,99 € + VAT Add to cartInternal Circlip Pliers
- A must tool for every scuba gear service center
- 150mm length
- Blades made with black antirust material.
In stock
-
Male Oxygen Adpater to DIN 200 bar Female
29,99 € + VAT Add to cartMale Oxygen Adpater to DIN 200 bar Female
Only 2 left in stock
-
Regulator Converter to M26 DIN
39,00 € + VAT Add to cartRegulator Converter to M26 DIN
Only 3 left in stock
PAYMENT METHODS
We Accept All Major Credit Cards Securely Online.
Express Shipping
Express shipping available with delivery time 3-5 days.
© 2022 scubagaskets.com - Premium ORings Provider. All Rights Reserved
Powered By Novel Digital