EPDM O-rings
Filter by
Filter by
EPDM orings / Ethylene Propylene Diene Monomer has excellent resistance to heat, water and steam, alkali, mild acidic and oxygenated solvents, ozone, and sunlight (UV). EPDM compounds are not recommended for gasoline, petroleum oil and grease, and hydrocarbon environments. EPDM o-rings becoming even more popular in the scuba dive industry, in recent years as being more UV (sunlight ) resistant than NBR.
Showing 1–12 of 68 results
-
003 Scuba Dive O-rings EPDM 85Sh for SPG Swivels
13,99 € + VAT Add to cart003 Scuba Dive O-rings EPDM extrusion resistant for SPG Swivels
- Qty: 50 O-rings
- ID X CS: 1,42 X 1,52 mm
- Used for Submersible pressure gauge SPG consoles: internal swivel seal
- Compatible with almost every brand SPG.
In stock
-
005 Scuba O-Rings EPDM 70Sh
12,99 € + VAT Add to cart- EPDM sh70 – 005
- Qty: 50 O-rings
- ID X CS: 2,57 X 1,78 mm
- Seal used in older depth and tank “stem” gauges
In stock
-
006 Scuba Dive O-rings EPDM 85Sh
13,75 € + VAT Add to cartO-rings EPDM 85Sh – 006
- ID x CS : 2,90 x 1,78 mm
- Used for Common seal in regulator balance chambers; Power inflator stems; CO2 detonators; SAS gland seal
- Qty: 50 pcs
Only 3 left in stock
-
007 Scuba O-Rings EPDM Sh70
13,90 € + VAT Add to cartEPDM sh70 – 007
- Qty: 50 O-rings
- ID X CS : 3,68 X 1,78 mm
- Used for Regulator piston ring; small HP seal
In stock
-
008 EPDM O’Rings 70Sh
12,50 € + VAT Add to cartEPDM O-rings 70Sh – 008
- Qty: 50 O-rings
- ID x CS : 4,47 x 1,78 mm
- Used for Sonic regulators; Regulator piston ring; small HP sea
In stock
-
008 EPDM O’Rings 85Sh
12,50 € + VAT Add to cartEPDM O-rings 85Sh – 008
- Qty: 50 O-rings
- ID x CS : 4,47 x 1,78 mm
- Used for Sonic regulators; Regulator piston ring; small HP sea
In stock
-
008 Scuba O-Rings EPDM 70Sh
10,50 € + VAT Add to cartEPDM o-rings 008
- Qty: 50 O-rings
- ID x CS : 4,47 x 1,78 mm
In stock
-
010 Scuba Dive O’Rings EPDM 85Sh
12,90 € + VAT Add to cartScuba Dive EPDM o-rings sh85-010
- Use on tank valve stems
- ID x CS : 6,07 x 1,78 mm
- Qty:50 O-rings
In stock
-
010 Scuba O-Rings EPDM 70Sh
12,95 € + VAT Add to cart010 LP Hose O-Rings EPDM 70Sh (1st stage end)
- Qty: 50 O-rings
- As Atomic part no: 20-2010-00
- ID X CS : 6,07 X 1,78 mm
- Used for Regulator hose: swivel end; Piston barrel HP seal; 2nd stage orifice seal; Valve stem seals; Early calypso Regulators; Power inflators stems;
- Similar MARES part no: 46110205
In stock
-
011 Hose O’rings EPDM 85Sh
14,20 € + VAT Add to cart011 Hose O’rings EPDM 85Sh
- Qty : 50 O-rings
- EPDM 85Sh-011
- ID X CS : 7,65 X 1,78 mm
In stock
-
011 Male Hose end Scuba O-rings EPDM Sh70
12,95 € + VAT Add to cart- Qty: 50 O-rings
- ID x CS: 7,65 x 1,78 mm
- Used For Regulator hose: male end; Regulator port plugs LP; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets; Piston HP barrel BC hose coupler
- Similar to Sherwood part no:5121-104
- As Atomic part no: 20-2011-00
In stock
-
012 EPDM O-Rings 85Sh – Scuba HP Hose Seal
13,50 € + VAT Add to cartAS568-012 EPDM O-rings, 85 Shore A hardness, for selected scuba high-pressure hose connections.
- Size: 9.25 × 1.78 mm
- Material: EPDM 85 Shore A
- Standard: AS568-012
- Application: Male 7/16″-20 UNF scuba HP hose fitting
Verify manufacturer specifications before installation. Not supplied oxygen-clean or oxygen-ready.
In stock
PAYMENT METHODS
We Accept All Major Credit Cards Securely Online.
Express Shipping
Express shipping available with delivery time 3-5 days.
© scubagaskets.com - Premium ORings Provider. All Rights Reserved
Powered By Novel Digital