For Cressi Sub
Filter by
Filter by
Showing 1–12 of 36 results
-
008 Scuba O-Rings NBR 70Sh
9,00 € + VAT Add to cart- NBR sh70 – 008
- Qty: 50 O-rings
- ID X CS : 4,47 x 1,78 mm
- Used for Sonic regulators; Regulator piston ring; small HP seal
- As cressi sub oring no : HZ730104
In stock
-
011 BC Hose O-Rings NBR 70Sh
12,99 € + VAT Add to cart- NBR sh70 – 011
- Qty: 50 O-rings
- ID X CS : 7,6 X 1,7 mm
- Used For Regulator hose: male end; Regulator port plugs LP; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets; Piston HP barrel BC hose coupler, BCD Hose o-ring
- As Cressi-sub oring part no : hz730108
Only 3 left in stock
-
015 Scuba Dive O’Rings EPDM 85Sh
14,25 € + VAT Add to cart015 Dive O’Rings EPDM 85Sh
- Qty : 50 O-rings
- ID x CS : 14 x 1,78 mm
- Used for Tank Valve Bonnet Nut;1st stage inlet fittings; HP seal retainer seal; J valve module; Valve HP plugs; 2nd stage barrel and housing plug seals
- As Oceanic o-ring part no 6508
- As Cressi-sub o-ring part no HZ735126
In stock
-
022 Scuba O-Rings NBR 70Sh
13,99 € + VAT Add to cart022 Scuba O-Rings NBR 70Sh
- Qty: 50 O-rings
- ID x CS: 25,12 x 1,78 mm
- Used for Common regulator piston ring; Body plug seals; Paintball guns
- Cressi sub piston oring as HZ735108
In stock
-
Sale!
Digital IP 2nd Stage Regulator Tester Gauge 8.5-10 Bar -125-150 psi
Original price was: 99,00 €.72,00 €Current price is: 72,00 €. + VAT Add to cartDigital IP 2nd Stage Regulator Tester Gauge 8.5-10 Bar -125-150 psi
In stock
-
DIN Dust Cover Cup-Waterproof
7,49 € + VAT Add to cartPlastic Waterproof DIN Protective Cup cover for 1st stages
This 1st DIN dust cup cover protects regulators against contaminants and water.
In stock
-
Dual Balnced Drive Inline Adjusting Scuba Tool with SPG
165,00 € + VAT Read moreDual in-line orifice adjusting tool Hex-Slotted with SPG
- Tool for fine-tuning 2nd stage regulators
- Fitting included
Out of stock
-
Exhaust Tee for 2nd stage Beuchat VX models 16963
12,00 € + VAT Add to cartExhaust Tee for 2nd stage Beuchat Old VX models
In stock
-
Filter retainer Clip for Cressi sub 1st Stage as part no HZ730188
1,35 € + VAT Add to cartStainless steel conical Filter retainer safety clip for Cressi sub 1st Stage gear as part no: HZ730188
Only 2 left in stock
-
Halcyon Streamline P-Valve Duckbill Check Valve – 40.044.009
12,00 € + VAT Add to cartReplacement duckbill check valve for compatible Halcyon Streamline drysuit P-Valves.
- Part reference: 40.044.009
- Component: one-way duckbill check valve
- Sold individually; not the complete P-Valve or service kit.
Confirm the exact replacement part and follow the manufacturer’s service instructions.
In stock
-
Halcyon Streamline P-Valve Service Kit – 40.040.013
20,00 € + VAT Add to cartReplacement-parts service kit for the Halcyon Streamline drysuit P-Valve, reference 40.040.013.
For maintenance of compatible P-Valve assemblies using the equipment manufacturer’s instructions.
Check compatibility with the specific P-Valve model before servicing.
In stock
-
HP Seat for Beuchat, Cressi, SeacSub 1st stage
7,99 € + VAT Read moreH.P Piston Seat for Scuba Gear 1st stages.
- As Seac-sub part no S540005
- As Cressi Sub part no HZ730155
- As Beuchat part no 7906
Out of stock
PAYMENT METHODS
We Accept All Major Credit Cards Securely Online.
Express Shipping
Express shipping available with delivery time 3-5 days.
© scubagaskets.com - Premium ORings Provider. All Rights Reserved
Powered By Novel Digital