- FOR ORDERS OVER 70 EURO - FREE DELIVERY WORLDWIDE
- info@scubagaskets.com
Shop
Viton® O-rings for Scubapro part no:01.050.110
October 3, 2018
O-rings for Scubapro EPDM part no:01.050.193
October 3, 2018
As Scubapro O-rings EPDM part no:01.050.108
10.50€
As Scubapro O-rings EPDM part 01.050.108
- Qty : 50 O-rings
- Scubapro part 01.050.108
In stock
Description
You may also like…
-
Add to cart
Universal HP swivel O-ring installation assist tool
18.00€Universal HP swivel O-ring installation assist tool
The HP swivel is a tiny part and most of the time it is difficult to put O-rings on the small HP swivel.By using this tools the work gets done in a matter of seconds.
- Add to cart
-
Read more
Tribolube® 66-2 Oz Tube
39.00€Tribolube® 66-2 Oz Tube
Tribolube-66 is intended for use in mild to high pressure systems where nonreactive with LOX and GOX is required, strong acids, oxidizers, fuels, and solvents is required. Is qualified to MIL-PRF-27617, Type 1. Although this lubricant is very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the greases under certain conditions.Tribolube-66
Related products
-
Select options
Genuine Viton®O-Rings 75Sh-010
9.95€Genuine Viton®O-Rings 75Sh-010
- Qty : 50 O-rings
- ID X CS : 6,07 X 1,78 mm
- Used for Regulator hose: swivel end; Piston barrel HP seal; 2nd stage orifIce seal; Valve stem seals; Early calypso Regulators; Power inflators stems;
- Similar APEKS :AP1154
-
Select options
Genuine Viton®O-Rings 75Sh-022
17.90€Genuine Viton®O-Rings 75Sh-022
- ID X CS : 25,1 X 1,78 mm
- Viton O-rings for Nitrox
- Used for Common regulator piston ring; Body plug seals; Paintball guns
- Qty : 50 O-rings
-
Select options
Genuine Viton®O-Rings 75Sh-011
9.60€Genuine Viton®O-Rings 75Sh-011
- Qty : 50 O-rings
- ID X CS : 7,6 X 1,7 mm
- Used for Regulator hose: male end; Regulator port plugs LP; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets; Piston HP barrel BC hose coupler.
- Similar Apeks :AP1409
