oring tool
Filter by
Filter by
Showing all 9 results
-
External Thread Valve NO-GO Tool G5/8 x14 tpi tol A
149,99 € + VAT Add to cartNO-GO Tool G5/8×14 tpi tol A. (For DIN thread inspection)
**Made in Germany**Only 1 left in stock
-
HP and LP scuba O-ring installation Tool Set ( 2 tools)**updated**
15,99 € + VAT Add to cartHP and LP O-ring installation bullet toolset (2 pcs) **Updated**
Regulator hoses O-ring installation tool, that prevents damage to the new o-rings caused by the threads.
In stock
-
Internal O-ring Scuba tool set for Scubapro MK5,MK6
19,99 € + VAT Add to cartInternal O-ring Scuba toolset for Scubapro MK 5, MK 6
Used to insert O-ring into the body of a Scubapro MK 10 first stage. Place the 2 parts of this toolset on the top and bottom of the first stage body and push the O-ring into place with the rod.
Only 1 left in stock
-
Internal O-ring scuba tool set for Scubapro MK10
13,99 € + VAT Add to cartInternal O-ring toolset for Scubapro MK 10
Instructions: Place 2 of the parts of this tool set on the top and bottom of the first stage body and push the O-ring into its place with the small rod of the toolset.
In stock
-
Schrader valve stem tool with 2 valves
4,99 € + VAT Add to cartSchrader valve stem tool
A very handy small tool when removing the schrader valve that is used in BDC inflators and inflator hoses.
- Free 2 Valves
In stock
-
Scuba inline Tool for 2nd stage adjusting-fine tuning (hexagonal)
35,99 € + VAT Add to cartInline 2nd Stage Regulator Adjustment Tool (Hexagonal)
- Tool for fine-tuning 2nd stage regulator. Just connect the tool inline between the 2nd stage regulator and the LP hose, allowing adjustment while the hose is pressurized. The hexagon-end of the tool is inserted into the 2nd stage to allow the orifice to be turned to the proper adjustment for the 2nd stage air inlet.
- Chrome Plated Bronze Tool
In stock
-
Scuba inline Tool for 2nd stage adjusting-fine tuning (slotted)
39,99 € + VAT Add to cartInline 2nd Stage Regulator Adjustment Tool (Slotted)
- Tool for fine-tuning 2nd stage regulator. Just connect the tool inline between the 2nd stage regulator and the LP hose, allowing adjustment while the hose is pressurized. The slotted end of the tool is inserted into the 2nd stage to allow the orifice to be turned to the proper adjustment for the 2nd stage air inlet.
- Chrome Plated Bronze Tool
In stock
-
Scubapro DIN retaining knob O-ring installation bullet tool
4,99 € + VAT Add to cartScubapro DIN retaining knob O-ring installation bullet tool
The sharp threads of DIN retaining knobs can damage the new O-ring if pushed over these threats. Using this tool prevents any damage to the new oring.
In stock
-
Universal Heavy Duty First Stage Holder Tool
26,99 € + VAT Add to cartUniversal Heavy Duty First Stage Holder Tool
- Specially Designed to prevent damage of 1st stage scuba gear.
- Made of Bronze, so when an excessive force applied is to 1st stage during service the tool snaps, preventing damage to the case and threads of 1st stage.
- LP with 3/8 UNF – HP with 7/16 UNF threads.
In stock
PAYMENT METHODS
We Accept All Major Credit Cards Securely Online.
Express Shipping
Express shipping available with delivery time 3-5 days.
© 2022 scubagaskets.com - Premium ORings Provider. All Rights Reserved
Powered By Novel Digital