Universal Heavy Duty First Stage Holder Scuba Tool

26,99  + VAT

In stock

Add to Wishlist
Add to Wishlist

Universal Heavy Duty First Stage Holder Tool

  • Specially Designed to prevent damage of 1st stage scuba gear.
  • Made of Bronze, so when an excessive force applied is to 1st stage during service the tool snaps, preventing damage to the case and threads of 1st stage.
  •  LP with 3/8 UNF – HP with 7/16 UNF threads.

Important Instructions of use: In order to prevent any damage to the internal threads of the regulator, due to force applied afterwards,  the tool must be screwed all the way into the 1st stage body until the surface of the tool touches the surface of the regulator body. In this way, the force will be diverted on the regulator body itself, instead to the threads, protecting them from damage and protecting the tool from breaking.

You may be interested in

Viton® O-Rings for Nitrox

010 Black Viton® O-Rings 75Sh

  • Viton FKM sh75 – 010
  • Used for Regulator hose: swivel end; Piston barrel HP seal; 2nd stage orifIce seal; Valve stem seals; Early calypso Regulators; Power inflators stems;
  • ID x CS : 6,07 x 1,78 mm
  • Qty: 50 O-rings