Shop

Service kit for Scubapro 2nd stage for A700 as kit no: 11-700-045 Updated
November 22, 2019
scubapro service kit
Service kit for Scubapro 2nd stage R190 R380 R290 R390 as kit no 11.300.045
November 22, 2019
Show all

Service kit for Scubapro B.P.I. similar to kit no 21.626.045

7.00 5.99 + vat

Service kit for Scubapro B.P.I. similar to kit no 21.626.045

kit Part content list 

  • O-ring chart
  • O-ring as part no: 01.050.117x 2
  • O-ring as part no:01.050.126 x 2
  • O-ring as part no:01.050.132 x 2
  • O-ring as part no:01.050.138 x 2
  • Schrader valve as part no:21.562.106 x 1

 

In stock

You may also like…

  • BC inflator tool

    BCD Power Inflator Service Tool.

    9.99 + vat

     BCD Power Inflator Tool

    • Made from Stainless Steel
    • 1/2″ hex wrench for the low-pressure quick-release nipple
    • Special spanner with two bent tangs which fit the slots in the inlet valve cartridge assembly and facilitates its easy removal
    • 3/8″ hex to keep the end of the valve spool in place while removing the plastic button from the cartridge valve assembly
    • Handwheel nut driver used to service scuba valves.
    Add to cart
  • Internal O-ring tool set for Scubapro MK5, MK6, MK10

    19.99 17.99 + vat

    Internal O-ring tool set for Scubapro MK5, MK6, MK10

    Used to insert O-ring into the main body of a Scubapro MK10 first stage. With this tools the job is done in a matter of seconds. Place 2 of the parts of this tool set on the top and bottom of the first stage body and push the O-ring into its place with the small rod of the tool set.

    Read more