Polyurethane O-rings for Scubapro part no:01.050.193
October 3, 2018
O-rings for Scubapro as part no: 01.050.117
October 3, 2018
As Scubapro O-ring part no: 01.050.428
7.85€ + vat
As Scubapro O-ring part no: 01.050.428
- Scubapro part no :01.050.428
- Qty : 10 O-rings
In stock
Description
You may also like…
-
Select options
Scuba O-Rings EPDM 70Sh-111
12.35€ + vatScuba O-Rings EPDM 70Sh-111
- Qty : 50 O-rings
- ID X CS : 10,77 X 2,62 mm
- Similar to Sherwood part no: 6400-138
-
Select options
Genuine Viton®O-Rings Sh90-111
16.95€ + vatGenuine Viton®O-Rings Sh90-111
- Qty: 50 O-rings
- ID X CS : 10,7 X 2,6 mm
- FKM Sh 90-111 for Nitrox applications
- Used for Australian/ Nemrod valves; BC inflators; DIN regulator seals
- Similar APEKS :AP1166
- As Atomic part no:20-211-00
-
Select options
Scuba O-Rings NBR 90Sh-111
9.00€ + vatScuba O-Rings NBR 90Sh-111
- Qty: 50 O-rings
- ID X CS : 10,7 X 2,63 mm
- Used for Small DIN Regulator/Valve;Australian/ Nemrod valves; BC inflators
Related products
-
Select options
O-rings for Scubapro as part no: 01.050.117
12.99€ + vatO-rings for Scubapro as part no :01.050.117
- Qty : 50 O-Rings
- Scubapro code: 01.050.117
-
Select options
Viton® O-rings for Scubapro part no:01.050.395
19.90€ + vatViton® O-rings for Scubapro part no:01.050.395
- Used for Regulator piston ring and cap; Dacor HP module
- Scubapro part no 01.050.395
- Qty : 50 O-rings
-
Add to cart
Scubapro DIN retaining knob O-ring installation bullet tool
4.99€ + vatScubapro DIN retaining knob O-ring installation bullet tool
DIN retaining knobs have big and sharp threats and putting an O-ring over these threats most of the time damages the O-ring.By using this small bullet the job is done quick while O-ring is still in perfect condition.
