Strap set for stages Steel 7L tanks
February 26, 2020
JJ-CCR Hose ends Tee O-rings NBR Sh70
February 29, 2020
JJ-CCR Delrin Button plate Canister O-rings
4.99€ + vat
JJ-CCR Delrin Button plate Canister O-ring
- Button plate Canister O-ring NBR sh70
- Size ID x CS :160 x 3 mm
- Qty: 1 O-ring
In stock
Description
Reviews 0
Only logged in customers who have purchased this product may leave a review.
You may also like…
-
Diaphragm for APEKS 1st Stage as SGAP1478
8.99€ + vat**Bulk Discounts 5%,10% and 35%**
- AP Diaphragm part no: SGAP1478
-
H.P Valve seat for APEKS 1st stage as SGAP1419
11.99€ + vatH.P. Valve seat for APEKS 1st Stage
** Bulk Discounts -5%,15%,25%,35% **- HP valve seat
- As part no SGAP1419
Related products
-
Actual Size Scuba dive O-ring identification mat 115 o-ring sizes
39.99€ + vatScuba O-ring Identification bench mat-115 O-ring sizes (Working mat)
Rubber-neopen O-ring identification chart working mat. Contain all APEKS, Scubapro, Mares, Dive Rite, Cressi sub, Aqualung, Beuchat, JJ-CCR, and dive computer o-rings (Oceanic, Aqua, Suunto) as well as the most common o-rings used in scuba dive, like Tank neck, Tank valve, LP & HP Hose and BCD o-rings.A helpful tool for every scuba technician.
- Rubber pad 2mm thickness
- Size 35 x 65cm
-
O-ring Service kit for JJ-CCR Rebreather
45.99€ + vatO-Ring Service kit for JJ-CCR rebreather
** New Updated kit **
- NBR -Viton-EPDM Sh70 O-rings ( 50 pieces)
- 1x Head to Scrubber connection O-ring 140 x 4
- 2x MAV Swivel O’rings 11.8 x 2.4
- 1 x Battery Cover O’ring 78 x 3
- 3 x Solenoid tube feed O’rings 10 x 2
- 1x ADV Lever fitting O’ring 6.78 x 1.78
- 8 x Hose ends -Loop O’rings 32 x 2
- 1 x ADV 90 Elbow O-ring 2.9 x 1.78
- 4 x Banjo Bolt (old style) O’ring 9.52 x 1.78
- 1x Solenoid tube End O’ring 5 x 1.5
- 4 x MAV button spine O’ring 3.3 x 1.6
- 6x Banjo Bolt (New style) O’ring 8x 2
- 3 x Banjo Bolt to t-piece 7.3 x 2.4
- 2 x Delrin bottom plate to canister O-ring 160 x 3
- 2 x T-piece to lung connection O-ring 40 x 3
- 2 x Delrin lung fitting O-ring 50 x 2
- 2 x HUD Button O-ring
- 2x Head to Canister O-ring 139.29 x 3.53
- 3 x Flowstop Slider
- 1 Flowstop Bobbin
-
O-ring Service kit for DSV JJ-CCR
18.00€ + vatO-Ring Service kit for DSV JJ-CCR rebreather
New Kit
- NBR -Sh70 O-rings ( 11 pieces)
- 5 x For both ends of barrel ,both convoluted hose ends (DSV end) O-ring 36 x 2
- 1 x O-ring for the 4mm screw holding the lever 4 x 1
- 1 x Mouth Piece Orifice O’ring 28 x 2
- 4 x Hose ends -Loop O’rings 32 x 2
Reviews
There are no reviews yet.