Pull Dump valve holder for Scubapro
September 12, 2021Service kit for Air source 3 as kit no 900021
September 12, 2021
EPDM Scuba O’Rings Sh70-611
13.99€ + vat
EPDM O-rings Sh70 -611
- Qty: 50 O-rings
- ID X CS : 8,74 X 1,78 mm 7/16″
- O-ring for HP Hose Male
- As Mares part no 46110108
- An intermediate size o-ring of 011 and 012.
In stock
Description
You may also like…
-
Scuba O-rings EPDM 70Sh-9.52 x 1.78
11.90€ + vatScuba O-rings EPDM 70Sh-9.52 x 1.78
- Qty: 50 O-rings
- ID X CS : 9,52 X 1,78 mm
-
Scuba O-Rings NBR 70Sh-012
9.00€ + vatScuba O-Rings NBR 70Sh-012
- Qty: 50 O-ring
- ID X CS : 9,2 X 1,7 mm
- Used For Console/gauge hoses: male end; Underneath filter; Hose adapters; HP seat seal; LP swivel cap; HP port plugs
-
011-Genuine Viton®O-Rings 75Sh
16.60€ + vatGenuine Viton®O-Rings 75Sh-011
- Qty : 50 O-rings
- ID X CS : 7,6 X 1,7 mm
- Used for Regulator hose: male end; Regulator port plugs LP; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets; Piston HP barrel BC hose coupler.
-
Scuba O-rings NBR 90Sh-011
9.85€ + vatScuba O-rings NBR 90Sh-011
- Qty : 50 O-rings
- ID X CS : 7,65 X 1,78 mm
- Used for standard 3/8″ LP Port;Regulator hose: male end; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets; Piston HP barrel BC hose coupler
Related products
-
Scuba Dive O’Rings EPDM 85Sh-015
12.40€ + vatDive O’Rings EPDM 85Sh-015(Hard)
- Qty : 50 O-rings
- ID X CS : 13,9 X 1,7 mm
- Used for Tank Valve Bonnet Nut;1st stage inlet fittings; HP seal retainer seal; J valve module; Valve HP plugs; 2nd stage barrel and housing plug seals
- As Oceanic o-ring part no 6508
-
O-Rings for Suunto TanPOD Transmitters
16.99€ + vatO-Rings for Suunto Suunto TanPOD transmitters
**Bulk Discount up to 35% over 3,5,10,20,50 packs**
- Qty: 10 O-rings
- EPDM
- O-rings for SUUNTO TanPOD Transmitter
- IDx CS 25 x 2
-
O’Rings EPDM 85Sh-013
15.80€ + vatDive O-Rings EPDM 85Sh-013 (Hard)
- Qty : 50 O-rings
- ID X CS : 10,82 X 1,78 mm
- As Atomic part no:20-2013-00
