VITON® Green Scuba O-Rings 100% Oxygen

Genuine Green Viton®  O-rings for 100% Oxygen gas.

For orders over 3 pack per size -15%OFF

For orders over 5 pack per size -20%OFF

For orders over 10 pack per size -25%OFF

Showing 1–15 of 25 results

  • viton

    Genuine Green VITON® Sh90-214

    • VITON®-Sh90-214 (coming soon)
    • Qty: 10 O-rings
    • ID X CS : 24,9 X 3,5 mm
    • Used for Cylinder to 3/4 valve seal; Cylinder to M25X2 valve Seals
    •  Similar Scubapro part no 01.050.261
  • viton

    Genuine VITON® Green 70Sh-112

    17.00
    • VITON-70Sh-112
    • 10 O-rings
    • ID X CS : 12,3 X 2,6 mm
    • Used for Steel tank valve; Basal DIN seal
  • viton

    Genuine VITON® Green Sh90-003

    • Viton®-Sh90-003 (coming soon)
    • 10 O-rings
    • ID X CS : 1,42 X 1,52 mm
    • Used for HP Hose ;Submersible pressure gauge/consoles: internal swivel seal
  • viton

    Genuine VITON® Green Sh90-006

    • VITON® Green Sh90-006 (coming soon)
    • ID X CS : 2,90 X 1,7 mm
    • Used for Common seal in regulator balance chambers; Power inflator stems; CO2 detonators; SAS gland seal, Apeks HP seat (1st stage)
    • Similar to APEKS :AP1299
    • Qty : 50 O-rings
  • viton

    Genuine VITON® Green Sh90-012

    • Green Viton®-Sh90-012 (coming soon)
    • Qty : 10 O-rings
    • ID X CS : 9.2 X 1.78 mm
    • Used for Console/gauge hoses: male end; Underneath filter; Hose adapters; HP seat seal; LP swivel cap; HP port plugs.
    • Similar Scubapro part no :01.050.403
    • High pressure o-ring for Perdix wireless transmitter 
    • Similar APEKS :AP1445
  • viton

    Genuine VITON® Green Sh90-112

    • VITON®-Sh90-112 (coming soon)
    • 10 O-rings
    • ID X CS : 12,3 X 2,6 mm
    • Used for Steel tank valve; Basal DIN seal
    • Similar Scubapro part no :01.050.405
  • viton

    Genuine VITON®Green 90Sh-111

    • Green Viton®-Sh90-111 (coming soon)
    • 10 O-rings
    • ID X CS : 10,77 X 2,62 mm
    • Used for Australian/ Nemrod valves; BC inflators; DIN regulator seals
    • Similar Scubapro part no 01.050.195
    • Similar APEKS :AP1166
  • viton

    Genuine VITON®Green Sh90-116

    • Green Viton® Sh90-116
    • Qty: 10 O-rings
    • I D X CS : 18,72 X 2,62 mm
    • Used for 1/2 Tank neck(Small) Genesis tank valve; BCD Inflator Mechanisms; Paintball Guns
  • viton

    Green Viton® 70Sh-120

    21.00
    • Viton Green 70 Sh-120
    • ID X CS :25.07  X 2.62 mm
    • Similar to scubapro par no :01.050.228
    • 10 O-rings
  • viton

    Green Viton® Sh70-111

    17.00
    • GreenViton -Sh70-111
    • 10 O-rings
    • ID X CS : 10,77 X 2,62 mm
    • Used for Australian/ Nemrod valves; BC inflators; DIN regulator seals
  • viton

    Green Viton® Sh70-114

    21.00
    • Viton®Green-Sh70-114
    • 10O-rings
    • ID X CS :15.54  X 2.62 mm
    • Early piston models; Paintball Guns 
  • viton

    Green VITON®-Sh70-010

    16.00
    • Green Viton® Sh70-010
    • Qty: 10 O-rings
    • ID X CS : 6,07 X 1,78 mm
    • Used for Regulator hose: swivel end; Piston barrel HP seal; 2nd stage orifIce seal; Valve stem seals; Early calypso Regulators; Power inflators stems;
    • Similar to APEKS :AP1154
  • viton

    Green VITON®-Sh70-021

    18.00
    • Viton® Green -Sh70-021
    • 10 O-rings
    • ID X CS : 23,5 X 1,78 mm
    • Used for Regulator piston ring
  • viton

    Green Viton®-Sh70-022

    23.00
    • Green Viton®-Sh70-022
    • 10 O-rings
    • ID X CS : 25,1 X 1,78 mm
    • Used for Common regulator piston ring; Body plug seals; Paintball guns
    • Similar Scubapro part no:01.050.407
  • viton

    Green Viton®-Sh70-113

    19.00
    • Green Viton®-Sh70-113
    • 10 O-rings
    • ID X CS :13.95  X 2.62 mm
1 2