NBR O-rings sh70
Filter by
Filter by
Showing 1–12 of 128 results
-
001 Scuba O-Rings NBR 70Sh
17,00 € + VAT Add to cart001 Scuba O-Rings NBR 70Sh HTF
- Qty: 50 O-rings
- ID x CS : 0,7 x 1,0 mm
In stock
-
002 Scuba O-Rings NBR 70Sh
9,99 € + VAT Add to cartNBR Scuba orings sh70 – 002
- ID x CS : 1,1 x 1,2 mm
- Qty: 50 O’Rings
In stock
-
003 NBR 70Sh SPG Swivel O-Rings – 50 pcs
10,95 € + VAT Add to cartAS568-003 NBR 70 Shore A O-rings for compatible scuba SPG swivel connections.
- Size: AS568-003
- Inside diameter: 1.42 mm
- Cross-section: 1.52 mm
- Material: NBR (Nitrile Rubber)
- Hardness: 70 Shore A
- Quantity: 50 O-rings per pack
Important: Not supplied oxygen-clean or oxygen-ready. Material suitability must be verified before oxygen service.
In stock
-
004 Scuba O-rings NBR 70Sh
16,99 € + VAT Add to cartNBR Orings sh70 – 004
- Qty: 50 O-rings
- 1,78 mm x 1,78mm
- Used for Older internal swivel seal models; AT-PAC BC’s Power inflator control
In stock
-
006 Scuba O-Rings NBR Sh70
12,90 € + VAT Add to cartNBR sh70 – 006
- Qty: 50 O-rings
- ID X CS : 2,8 X 1,78 mm
- Used for Common seal in regulator balance chambers; Power inflator stems; CO2 detonators; SAS gland seal
- JJ-CCR ADV lever retaining screw seat
In stock
-
007 Scuba O-Rings NBR Sh70
15,90 € + VAT Add to cartNBR sh70 – 007
- Qty: 50 O-rings
- ID X CS : 3,68 X 1,78 mm
- Used for Regulator piston ring; small HP seal
In stock
-
008 Scuba O-Rings NBR 70Sh
9,00 € + VAT Add to cart- NBR sh70 – 008
- Qty: 50 O-rings
- ID X CS : 4,47 x 1,78 mm
- Used for Sonic regulators; Regulator piston ring; small HP seal
- As cressi sub oring no : HZ730104
In stock
-
009 Scuba O-Rings NBR 70Sh
12,99 € + VAT Add to cartNBR Orings sh70 – 009
- Qty: 50 O-rings
- ID x CS : 5,28 X 1,78 mm
- Used for Seal in open-tube depth gauges
- As Atomic part no: 20-2009-00
- As Mares part 46110204
In stock
-
010 NBR 70Sh Scuba O-Rings – 50 pcs
13,75 € + VAT Add to cartAS568-010 NBR 70 Shore A O-rings for compatible scuba diving equipment.
- Size: AS568-010
- Inside diameter: 6.07 mm
- Cross-section: 1.78 mm
- Material: NBR (Nitrile Rubber)
- Hardness: 70 Shore A
- Quantity: 50 O-rings per pack
Reliable nitrile rubber seals for scuba equipment servicing and maintenance.
Important: Not supplied oxygen-clean or oxygen-ready.
In stock
-
011 BC Hose O-Rings NBR 70Sh
12,99 € + VAT Add to cart- NBR sh70 – 011
- Qty: 50 O-rings
- ID X CS : 7,6 X 1,7 mm
- Used For Regulator hose: male end; Regulator port plugs LP; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets; Piston HP barrel BC hose coupler, BCD Hose o-ring
- As Cressi-sub oring part no : hz730108
Only 3 left in stock
-
012 Scuba O-Rings NBR 70Sh
12,00 € + VAT Add to cartNBR sh70 – 012
**Bulk discount -15% over 5pcs**
- Qty: 50 O-ring
- ID X CS : 9,2 X 1,78 mm
- Used For Console/gauge hoses: male end; Underneath filter; Hose adapters; HP seat seal; LP swivel cap; HP port plugs
In stock
-
013 Scuba O-Rings NBR 70Sh
11,99 € + VAT Add to cart013 Scuba O-Rings NBR 70Sh
**Bulk discount -15% over 5pcs**
- Qty: 50 O-rings
- ID X CS : 10,8 X 1,78 mm
- Used For 1/2″ LP large Port ,Reg male end hose
In stock
PAYMENT METHODS
We Accept All Major Credit Cards Securely Online.
Express Shipping
Express shipping available with delivery time 3-5 days.
© scubagaskets.com - Premium ORings Provider. All Rights Reserved
Powered By Novel Digital