NBR Sh70 Standard Grade O-rings
NBR (Nitrile), chemically, is a copolymer of butadiene and acrylonitrile.
Due to its excellent resistance to petroleum products, and its ability to be compounded for service over a temperature range of -35°C to +120°C (-30°F to +250°F), Nitrile /NBR is the most widely used elastomer in the seal industry today. Also many military rubber specifications for fuel and oil resistant O-rings require nitrile based compounds.
Nitrile compounds do not possess good resistance to ozone, sunlight, or weather. They should not be stored near electric motors or other ozone generating equipment.
Showing 1–15 of 72 results
-
Actual Size Scuba dive O-ring identification mat 115 o-ring sizes
39.99€ + vatScuba O-ring Identification bench mat-115 O-ring sizes (Working mat)
Rubber-neopen O-ring identification chart working mat. Contain all APEKS, Scubapro, Mares, Dive Rite, Cressi sub, Aqualung, Beuchat, JJ-CCR, and dive computer o-rings (Oceanic, Aqua, Suunto) as well as the most common o-rings used in scuba dive, like Tank neck, Tank valve, LP & HP Hose and BCD o-rings.A helpful tool for every scuba technician.
- Rubber pad 2mm thickness
- Size 35 x 65cm
-
BCD Hose O-Rings NBR 70Sh-011
8.95€ + vatBCD Hose O-Rings NBR 70Sh-011
- Qty: 50 O-rings
- ID X CS : 7,6 X 1,7 mm
- Used For Regulator hose: male end; Regulator port plugs LP; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets; Piston HP barrel BC hose coupler
-
LP BCD Hose O-Rings NBR 70Sh-7.50 x1.50
12.90€ + vatBCD Hose O-Rings NBR 70Sh-7.50 x 1.50
- Qty : 50 O-rings
- ID X CS : 7,5 mmX 1,5 mm
- Inflator Hose O-Ring
-
LPI. Low presure Inflator Hose O-rings-610
8.75€ + vatLow Pressure Inflator hose bull clip O-ring for BCD’s NBR Sh70-610
- Qty: 50 O-rings
- NBR 70Sh
- For Bull clip inflator BCD hose
- ID X CS: 6,75 mm x 1,78
-
NBR O-rings Sh70-155 x 3.53
11.90€ + vatNBR O-rings Sh70-155mm x 3.53mm
- Qty: 1 O-rings
- ID X CS : 155 X 3.53 mm
-
O-Ring Pick Metallic Tool- Ball End 1mm-1.2mm
15.99€ + vatMetallic O-ring pick Tool 2 sided Ball End 1mm/1.2mm (non-scratch tool)
-
O-Rings for NBR 70Sh-2.40×1.90
12.00€ + vatScuba O-Rings NBR 70Sh 2.4 x 1.9
- Qty: 50 O-rings
- ID X CS : 2,40 X 1,90 mm
-
O-Rings for NBR 70Sh-3.00 x3.00
12.00€ + vatScuba O-Rings NBR 70Sh 3.00 x 3.00
- Qty: 50 O-rings
- ID X CS : 3,00 X 3,00 mm
-
O-Rings for NBR 70Sh-6.00 x 2.00
9.90€ + vatScuba O-Rings NBR 70Sh 6.00 x 2.00
- Qty: 50 O-rings
- ID X CS : 6,00 X 2,00 mm
-
O-Rings for NBR 70Sh-9.00 x 2.00
10.90€ + vatScuba O-Rings NBR 70Sh 9.00 x 2.00
- Qty: 50 O-rings
- ID X CS : 9,00 X 2,00 mm
-
O-rings for Scubapro NBR similar to part no: 01.050.161
15.60€ + vatO-rings for Scubapro NBR part no :01.050.161
- Qty : 50 O-rings
- As part no: 01.050.161
-
O-Rings for Swivels NBR Sh70-003
7.25€ + vatO-Rings for swivels NBR Sh70 003
- Qty : 50 O-rings
- ID X CS : 1,4 X 1,5 mm
- Used for Submersible pressure gauge/consoles: internal swivel seal
-
O-Rings NBR 70Sh-15mm x 1.5mm
11.90€ + vatScuba O-Rings NBR 70Sh-15 x 1.5mm
- Qty : 50 O-rings
- ID X CS : 15 X 1,5 mm
-
Scuba O-Ring NBR-70Sh- 20 x 2
13.75€ + vat- Qty: 50 O-rings
- NBR Sh70- ID X CS : 20 X 2
- Ball arms of underwater photography gear