Service Kits & parts for Tank Valves
Showing 1–15 of 36 results
-
Read more
Actual Size Scuba dive O-ring identification mat 115 o-ring sizes
44.99€ + vatScuba O-ring Identification Chart-115 O-ring sizes(Working mat)
Rubber-neopen O-ring identification chart working mat. Contain all Apeks, Scubapro, Mares, Dive Rite, Cressi sub, Aqualung, Beuchat, JJ-CCR, and dive computer o-rings (Oceanic, Aqualung, Suunto) as well as the most common o-rings used in scuba dive, like Tank neck, Tank valve, LP & HP Hose and BCD o-rings.A helpful tool for every scuba technician.
- Rubber pad 2mm thickness
- Size 35 x 65cm
-
Add to cart
Burst Disc safety plug for scuba tank valves
4.99€ + vatBurst Disc safety plug for scuba tank valves New Product
- 3/8″ Burst disc plug.Operation pressure 3000psi pressure threshold 5000psi
- Add to cart
-
Add to cart
Copper washer for Scuba tank valves
1.45€ + vatCopper washer for Scuba tank M 25 x 2 valves
- 16 mm x 11.2mm thickness 0.8 mm
- Used For M 25 x 2 Valves
-
Select options
Green Scuba Tank Valve Set-Knob with Spring & Nut
10.99€ + vatGreen Scuba tank valve Set-Hand Knob with Nut & Spring
- Spring Included
-
Select options
Handwheel Nylon Washer for scuba tank valves
0.75€ + vatHandwheel Nylon Washer for scuba tank valves
**Bulk Discounts>10,50,100pcs**- Dimensions ⌀6.6 x ⌀ 17 x 1mm
-
Add to cart
Nut for scuba tank valves Handwheels
4.49€ + vatNut for scuba tank valves Handwheels 3/16″
- Chromed brass
-
Select options
O-ring Service kit for scuba Tank Valves
2.50€ + vatO-ring service Kit for Tank Valves
- For air use Only
- NBR Sh90-Sh70
- O-rings :112 x 2, 010, 214
- Read more
-
Add to cart
Safety Valve for First Stage Automatic ARGON ML / SBT
15.00€ + vatSafety Valve for First Stage Automatic ARGON ML / SBT
- Safety valve Specification:– safety (relief) valve for 1st stage argon,
– opening pressure 13 ATM,
– closing pressure 11 ATM.The safety valve mounted on the first stage of the regulator, as the name suggests, is used to protect subsequent devices in the event of a sudden, uncontrolled increase in intermediate pressure. The valve has an opening pressure of 13 ATM, which means that an increase above this value will cause the O-ring to be blown and excess gas will flow out.If the intermediate pressure drops below 11 ATM, the valve will close.
- Safety valve Specification:– safety (relief) valve for 1st stage argon,
-
Add to cart
Schrader Valve Stem for BCD Inflators
0.79€ + vatSchrader Valve Stem for BCD Inflator Head BC
- This is a replacement Schrader Valve Stem for you BC Inflator and other items
- BC Inflator Head
- Inner Tubes for dive floats, etc
- Bike Tires
- Car Tires
-
Select options
Scuba Bonnet Nut O-Ring NBR-70Sh-20 x 2
13.75€ + vatScuba Bonnet Nut O-Ring NBR-70Sh-20 x 2
- Qty: 50 O-rings
- NBR Sh70- ID X CS : 20 X 2 mm
- Used on scuba tank valves
- Select options
-
Select options
Scuba O-Ring NBR-70Sh-32 x 2
0.25€ + vatScuba O-Ring NBR-70Sh-32 x 2
- Qty: 1 O-rings
- NBR Sh70- ID X CS : 32X 2 mm
-
Select options
Scuba O-Ring Silicon-70Sh-3.1mm x 1.6mm
0.35€ + vatScuba Silicone O-Ring-70Sh-3.10 x 1.60
- Qty: 1 O-rings
- NBR Sh70- ID X CS : 3.1X 1.60 mm
