Service Kits for Rebreathers

Showing 16–21 of 21 results

  • scuba orings

    O-rings for MAV Swivel JJ-CCR 11.8 x 2.4

     EPDM O-rings for MAV Swivel JJ-CCR 11.8 x 2.4

    • Qty: 1 O-ring 

    0.45 + vat
  • Oxygen Regulator Scuba Hose

    Oxygen Regulator Hoses 76cm,102cm, 152cm, 213cm

    35.9939.99 + vat
  • Safety Valve for First Stage Automatic ARGON ML / SBT

    Safety Valve for First Stage Automatic ARGON ML / SBT

    • Safety valve Specification:– safety (relief) valve for 1st stage argon,
      – opening pressure 13 ATM,
      – closing pressure 11 ATM.The safety valve mounted on the first stage of the regulator, as the name suggests, is used to protect subsequent devices in the event of a sudden, uncontrolled increase in intermediate pressure. The valve has an opening pressure of 13 ATM, which means that an increase above this value will cause the O-ring to be blown and excess gas will flow out.If the intermediate pressure drops below 11 ATM, the valve will close.

    15.00 + vat
  • Scuba General use Scuba O-ring 140mm X 3mm

    General use Scuba  O-ring

    •  NBR sh70 id x cs 140mm x 3 mm 

    3.90 + vat
  • SG.Straps for Aluminum tanks 80 cuft

    Elastic Straps for Scuba Aluminum 80 cuft Tanks

    • Width: 6 cm
    • Elastic material
    • Color: Black
    • 3-rubber
    • Elongation 65%
    • Tolerance: +/- 5%
    • Flap of 25mm polypropylene
    • UV Static
    • heat-resistant
    • Saltwater resistant
    15.99 + vat
  • straps for 7lt tank

    Strap set for stages Steel 7L tanks

    Stage strap set Steel 7L

    This stage set is for Steel 7L  tanks containing  2 wide black elastic straps with green ear, 1 clamp with nylon cover, and two bolt-snaps with bungee. It is used for stage 100% Oxygen.

    Cylinder type: Steel 7 Liter Colour: GREEN

    Content:  2x  Tank Straps 6cm wide 1 x cylinder clamps with nylon cover 2 x bolt snaps 120mm 1m bungee (6mm)


    69.00 + vat
1 2