The Offered parts are NOT OEM parts, but excellent replacements equivalent to OEM Quality
Showing 1–15 of 369 results
-
1st stage Body of MK18 UL Scubapro as part no 10.755.101
85.00€ + vatBody of MK18 UL Scubapro as part no 10.755.101
-
ACT Upgrade kit for Mares as kit no 46201386
25.00€ + vatACT Upgrade kit for Mares as kit no 46201386
-
Actual Size Scuba dive O-ring identification mat 115 o-ring sizes
39.99€ + vatScuba O-ring Identification bench mat-115 O-ring sizes (Working mat) Last piece
Rubber-neopen O-ring identification chart working mat. Contain all APEKS, Scubapro, Mares, Dive Rite, Cressi sub, Aqualung, Beuchat, JJ-CCR, and dive computer o-rings (Oceanic, Aqua, Suunto) as well as the most common o-rings used in scuba dive, like Tank neck, Tank valve, LP & HP Hose and BCD o-rings.A helpful tool for every scuba technician.
- Rubber pad 2mm thickness
- Size 35 x 65cm
-
Adjusting Knob for APEKS gear part no SGAP2029-Aluminum**UPDATED**
25.99€ + vatAdjusting knob for APEKS as part number: AP2029- Marine Grade Aluminum
-
Adjusting knob for AquaLung as kit no 124251
25.00€ + vatAdjusting knob for AquaLung as kit no 124251
-
ADV lever retaining screw for JJ-CCR gear Viton®Green O-rings-610 Sh70
19.99€ + vatADV lever retaining screw for JJ-CCR gear Viton®Green O-rings-610 Sh70
- Qty: 50 O-rings
- Rated for 100% Oxygen
- ID X CS: 6,75 mm x 1,78
-
ADV lever retaining screw for JJ-CCR gear NBR O-rings-610 Sh70
8.00€ + vatADV lever retaining screw for JJ-CCR gear NBR O-rings-610 Sh70
- Qty: 50 O-rings
- ID X CS: 6,75 mm x 1,78
-
Back-up Ring for AQUA 1st Stage as part no SG119129 and MARES part no SG46110506
2.25€ + vatBack-Up Ring for AQUA and MARES 1st Stage
- For AQUA 1st stage part no: SG119129
- For MARES 1st stage part no: SG46110506
-
Base for BC Drain Valve
36.00€ + vatBase for BC Drain Valve
Dimensions: Bottom ear diameter 64mm , threaded pipe external diameter 42mm
-
BC Inlet Plug Scubapro as part no 21.082.101
3.75€ + vatBC Inlet Plug Scubapro as part no 21.082.101
-
BC Washer for Scubapro valves as part no 21.001.105
4.75€ + vatBC Washer for Scubapro valves as part no 21.001.105
-
BCD Dump Valve for Scubapro BCD as part no 21.200.017
39.00€ + vatBCD Dump Valve for Scubapro BCD as part no 21.200.017
-
BCD Pull Cable for Scubapro as part no 21.001.144
12.00€ + vatBCD Pull Cable for Scubapro as part no 21.001.144
-
Beuchat service kit 1st stage V8-V80-V10 V200 & V100. Ref :16544
34.99€ + vatService kit for Beuchat 1st stage 16544
- Suitable for V8, V80 V10 & V100 V200 Models after 2005
