Scuba Service Tools
Showing 31–45 of 47 results
- Add to cart
Scubapro 2nd stage cover tool for R190,G250,G200,M5
19.00€14.99€ + vatScubapro 2nd stage cover tool for R190, G250, G200, M5
This tool makes removing the cover of the Scubapro R190, G250, G200 and the M5 2nd stages as easy as it can get.
- Add to cart
Scubapro DIN retaining knob O-ring installation bullet tool
4.99€ + vatScubapro DIN retaining knob O-ring installation bullet tool
DIN retaining knobs have big and sharp threats and putting an O-ring over these threats most of the time damages the O-ring.By using this small bullet the job is done quick while O-ring is still in perfect condition.
- Add to cart
Scubapro MK20, MK21, MK25 bushing tool
15.90€ + vatScubapro MK20, MK21, MK25 bushing tool
- Some Scubapro first stages use a bushing arrangement to help the movement of the piston during diving.Installing these bushing rings and the small O-ringin-between them is made easy when you use this bushing tool.
- Add to cart
Silicone Grease for AIR Scuba applications
10.90€ + vatScuba Lubricant for Air applications 40 gr-1.4 Oz
Silicone grease compounds Not for use in OXYGEN SERVICE.
Used widely in the SCUBA industry in non-oxygen applications - Add to cart
- Add to cart
Tool for Diaphragm retainer Aqualung models Titan LX ,Core & Legend.
14.99€ + vatTool for Diaphragm retainer Aqualung models Titan LX, Core & Legend.
- Add to cart
Tool for Diaphragm retainer of older Aqualung models
14.99€ + vatTool for Diaphragm retainer of older Aqualung models
- After removing the second stage cover place the tool on top of the ring that holds the diaphragm and turn counter-clockwise in order to remove the ring and change the diaphragm. Do not over tighten during assembly to avoid damaging the new diaphragm.
- Add to cart
Tool for Scubapro filter star clip retainer installation
9.25€6.99€ + vatTool for Scubapro 1st stage filter star clip retainer installation.
- Made from high-quality Aluminum
- Add to cart
Universal bullet for installing O-ring on piston
12.00€9.99€ + vatUniversal bullet for installing O-ring on piston
This bullet will fit most common models of piston first stages. Below some examples: – Scubapro MK2 – Aqualung Calypso – Mares R2s – Sherwood Brut – Cressi AC2
- Add to cart
Universal DIN retainer scuba tool
16.99€ + vatUniversal DIN retainer tool
This tool will make the connector to come loose just like that.
- Add to cart
Universal Heavy Duty First Stage Holder
19.99€14.99€ + vatUniversal Heavy Duty First Stage Holder
- This first stage holder was designed in such a way to prevent damage of 1st stage scuba gear.
- Made of Bronze, so when an excessive force applied is to 1st stage during service the tool snaps, preventing damage of the case and threads of 1st stage.
- Two different threads on each side- LP with 3/8 UNF threads on one side and HP with 7/16 UNF threads on the other.
- Add to cart
Universal HP and LP scuba O-ring installation Tool Set ( 2 tools)
15.99€ + vatUniversal HP and LP O-ring installation bullet toolset (2 pcs)
Regulator hoses also need new O-rings during service but due to sharp threats, many of these O-rings get damaged at the installation process. Using this tool the O-rings stay in perfect shape, just place the tool over the hose and slide the O-ring in place.
- 2 bullet tools
- Read more
Universal HP seat extractor tool
20.00€ + vatUniversal HP seat extractor tool
Tool for HP seat extractor from pistons of many scuba gear brands.
- Add to cart
Universal HP swivel O-ring installation assist tool set
16.99€ + vatUniversal HP swivel O-ring installation assist tool set
The HP swivel is a tiny part and most of the time it is difficult to put O-rings on the small HP swivel.By using this tools the work gets done in a matter of seconds.
Step 1: Place the swivel on the base
Step 2: Load the bullet tool with the 003 o-rings
Step 3: Place the loaded bullet tool over the swivel and slide down one o-ring on the swivel !
- Add to cart
