Parts for Oceanic

The Offered parts are NOT OEM parts, but excellent replacements equivalent to OEM Quality

Showing all 6 results

  • O-RING IDENTIFICATION MAT

    Actual Size Scuba dive O-ring identification mat 115 o-ring sizes

    39.99 + vat

    Scuba O-ring Identification bench mat-115 O-ring sizes (Working mat) New Batch 

     

    Rubber-neopen  O-ring identification chart working mat. Contain all AP, Scubapro, Mares, Dive Rite, Cressi sub, Aqua , Beuchat, JJ-CCR, and dive computer o-rings (Oceanic, Aqua, Suunto) as well as the most common o-rings used in scuba dive, like Tank neck, Tank valve, LP & HP Hose and BCD o-rings.A  helpful tool for every scuba technician.

    • Rubber pad 2mm thickness
    • Size 35 x 65cm

     

     

     

    Add to cart
  • Regulator Service kit for Oceanic 1st stage SP4/SPORT/ piston DIN as kit no: 40.6156

    23.99 + vat

    Service kit for Oceanic Regulator 1st stage: SP4/SPORT/Unbalanced piston DIN as kit no: 40.6156

    kit Part content list 

    • As o-ring part no: 6374
    • As filter part no: 4546
    • As o-ring part no: 2.011
    • As o-ring part no: 2.012
    • As o-ring part no: 2.023
    • As o-ring part no: 2.008
    • As HP seat part no: 6850

    Add to cart
  • Regulator Service kit for Oceanic 1st stage: CDx/DXi-DIN as kit no: 40.6132

    23.99 + vat

    Regulator Service kit for Oceanic 1st stage: CDx/DXi-DIN as kit no: 40.6132

    kit Part content list 

    • As diaphragm no: 6574
    • As filter part no: 4546
    • As o-ring part no: 6498
    • As o-ring part no: 6374
    • As o-ring part no: 2.011
    • As o-ring part no: 2.012
    • As HP seat part no: 6490
    • As washer part no: 6777

    Add to cart
  • EPDM scuba Sh85 O-rings

    Scuba Dive O’Rings EPDM 85Sh-015

    12.40 + vat

    Dive O’Rings EPDM 85Sh-015(Hard)

    • Qty : 50 O-rings 
    • ID X CS : 13,9 X 1,7 mm
    • Used for Tank Valve Bonnet Nut;1st stage inlet fittings; HP seal retainer seal; J valve module; Valve HP plugs; 2nd stage barrel and housing plug seals
    • As Oceanic o-ring part no 6508
    Select options
  • Scuba inline Tool for 2nd stage adjusting-fine tuning (slotted)

    27.99 + vat

    Inline 2nd  Stage Regulator Adjustment Tool (Slotted)

    • Tool for fine-tuning 2nd stage regulator. Just connect the tool inline between the 2nd stage regulator and the LP hose, allowing adjustment while the hose is pressurized. The slotted end of the tool is inserted into the 2nd stage to allow the orifice to be turned to the proper adjustment for the 2nd stage air inlet.
    •  Chrome Plated Bronze Tool
    Add to cart
  • Service kit for Oceanic 1st stage : CDx/DXi-Yoke as kit no: 40.6131

    18.99 + vat

    Service kit for Oceanic 1st stage : CDx/DXi-Yoke as kit no: 40.6131

    kit Part content list 

    • As diaphragm no: 6574
    • As filter part no: 3545
    • As o-ring part no: 2.013
    • As o-ring part no: 6498
    • As o-ring part no: 2.011
    • As HP seat part no: 6490
    • As washer part no: 6777

    Add to cart