Shop

Showing 16–30 of 630 results

  • magnetic vice aluminum jaws

    Aluminum Magnetic jaws for Vice

    23.99 + vat

    Aluminum Magnetic jaws for Vice

    A must-have accessory of every scuba dive service technician to prevent damage or scratch  1st and 2nd scuba gear parts during service operations. 

    ** NEW PRODUCT **
    Add to cart
  • EPDM scuba Sh85 O-rings

    Aluminum Scuba tank Valve O’ring EPDM 85Sh-014

    11.99 + vat

    Scuba tank valve O’ring EPDM 85Sh-014 (Hard) for Aluminum tanks

    • Qty : 50 O-rings
    • ID X CS : 12,42 X 1,78 mm
    • Used for Std Yoke Regulator/K-Valve;+ 2nd stage inlet fittings; J-regulators; Common in aluminium cylinder valve to yoke regulator
    Select options
  • EPDM scuba Sh85 O-rings

    As Scubapro O-rings similar to part no: 01.050.136

    12.90 + vat

    As Scubapro EPDM Sh 85 O-ring part no 01.050.136 

    • Scubapro part no :01.050.136
    • Qty:50 O-rings 
    Select options
  • epdm o-rings

    As Scubapro O’Rings EPDM 70Sh part no: 01.050.347

    11.25 + vat

    O’rings for Scubapro EPDM 70Sh as part no: 01.050.347

    • Qty : 50 O-rings
    • Scubapro part no:  01.050.347
    Select options
  • EPDM scuba Sh85 O-rings

    As Scubapro O’rings EPDM 85Sh-similar to part.no :01.050.138

    13.50 + vat

    As Scubapro O’rings EPDM 85Sh part no:01.050.138

    • Qty : 50 O-rings
    • EPDM 85Sh
    • Scubapro part no :01.050.138
    Select options
  • Back-up Ring for AQUA 1st Stage as part no SG119129 and MAR part no SG46110506

    2.25 + vat

    Back-Up Ring for AQUA and MAR 1st Stage 

    • For AQUA 1st stage  part  no: SG119129
    • For MAR 1st stage  part  no: SG46110506

    Add to cart
  • Basic Scuba Service Tool Set with O-ring Identification Working Mat

    249.00 + vat

    Basic Universal Scuba Service Tool Set with O-ring Identification Working mat  

    Value Pack
    • This scuba service tool set contains the most common service tools needed for scuba gear service operations.

    Contain the following tools and parts:

    1. Universal 1st stage Holder. Threads – LP with 3/8 UNF, HP  7/16 UNF.
    2. Poppet 2nd stage installation tool 
    3. BCD Power Inflator Tool. 
    4. Bull clip O-ring installation tool of LP BCD hose with 10 x 610 O-rings. 
    5. Poly-carbonate O-ring pick Tool
    6. Schrader valve stem tool for BCD with 2 valves
    7. DIN retaining knob O-ring installation bullet tool
    8. Triboloube Scuba Lubricant for Air applications 56.7 gr – 2 Oz
    9. Universal bullet for installing O-ring on the piston
    10. Universal DIN retainer tool
    11. Universal HP and LP O-ring installation bullet toolset (2 pcs)
    12. Universal HP swivel O-ring installation assist toolset
    13. Universal Orifice seat extraction tool
    14. Scuba O-ring identification mat (120 o-ring sizes)
    15. Aluminum Magnetic jaws for Vice
    16. Slotted Orifice seat extraction tool for 2nd stage scuba gear
    Add to cart
  • BCD 45-degree Oral-Power Inflator

    29.99 + vat

     BCD Power Inflator K-style

    • This power inflator Fits the 1-inch inside diameter corrugated rubber hose found on most tech BC air cells including those from Dive Rite, Halcyon, Highland, HOG, Hollis, IST Dolphin, Light Monkey, OMS, OxyCheq, White Arrow and many other brands
    Add to cart
  • BCD Flexible Hose 76cm

    23.45 + vat

    BCD Flexible hose 76cm

    
    
    Add to cart
  • Scuba O-rings NBR Sh70

    BCD Hose O-Rings NBR 70Sh-011

    8.95 + vat

    BCD Hose O-Rings NBR 70Sh-011

    • Qty: 50 O-rings
    • ID X CS : 7,6 X 1,7 mm
    • Used For Regulator hose: male end; Regulator port plugs LP; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets; Piston HP barrel BC hose coupler
    Select options
  • BC inflator tool

    BCD Power Inflator Service Scuba Tool.

    9.99 + vat

     BCD Power Inflator Scuba Tool

    • Made from Stainless Steel
    • 1/2″ hex wrench for the low-pressure quick-release nipple
    • Special spanner with two bent tangs which fit the slots in the inlet valve cartridge assembly and facilitates its easy removal
    • 3/8″ hex to keep the end of the valve spool in place while removing the plastic button from the cartridge valve assembly
    • Handwheel nut driver used to service scuba valves.
    Add to cart
  • nbr90

    Beuchat O-Ring NBR 90Sh-8319

    11.99 + vat

    Beuchat O-Ring NBR 90Sh-8319

    • Qty: 50 O-rings
    • NBR Sh90
    • Beuchat part no:8319
    Select options
  • Scuba O-rings NBR Sh70

    Beuchat O-ring part no :7051

    10.99 + vat

    Beuchat O-ring part no :7051

    • Qty : 50 O-rings
    • NBR Sh70 
    • Beuchat part no 7051
    Select options
  • nbr90

    Beuchat O-ring part no :7076

    12.25 + vat

    Beuchat O-ring part no :7076

    • Qty: 50 O-rings
    • NBR Sh90
    • Beuchat Part no: 7076
    Select options
  • nbr90

    Beuchat O-ring part no :7924

    11.99 + vat

    Beuchat O-ring part no :7924

    • Qty : 50 O-rings 
    • Beuchat part no :7924
    Select options
1 2 3 4 5 40 41 42