Shop

Showing 166–180 of 205 results

  • nbr90

    Scuba O-Rings NBR 90Sh-113

    12.90

    Scuba O-Rings NBR 90Sh-113

    • Qty: 50 O-rings 
    • ID X CS : 13,9 X 2,6 mm
    • Used For Aquarius piston ring / cap seal; Healthway regulators
  • nbr90

    Scuba O-rings NBR 90Sh-114

    12.90

    Scuba O-rings NBR 90Sh-114

    • Qty: 50
    • ID X CS : 15.54 X 2.627 mm
    • Used for Early piston models; Paintball Guns
  • nbr90

    Scuba O-rings NBR 90Sh-115

    15.90

    Scuba O-rings NBR 90Sh-115

    • Qty: 50 O-rings 
    • ID X CS : 17,1 X 2,6 mm
    • Used for AMF HP module; BC fittings
  • nbr90

    Scuba O-rings NBR 90Sh-116

    14.90

    Scuba O-rings NBR 90Sh-116

    • Qty: 50 O-rings
    • I D X CS : 1,87 X 2,6 mm
    • Used for 1/2 Tank neck(Small) Genesis tank valve; BCD Inflator Mechanisms; Paintball Guns
  • nbr90

    Scuba O-rings NBR 90Sh-211

    19.90

    Scuba O-rings NBR 90Sh-211

    • Qty: 50 O-rings 
    • ID X CS : 20,22 X 3,53 mm
    • Used for Early BC fittings
  • nbr90

    Scuba O-rings NBR 90Sh-213

    18.90

    Scuba O-rings NBR 90Sh-213

    • Qty: 50 O-rings 
    • ID X CS : 23,3 X 1,3 mm
    • Used for Early BC fittings
  • nbr70

    Scuba O-Rings NBR Sh70-003

    5.95

    Scuba O-Rings NBR Sh70 003

    • Qty : 50 O-rings
    • ID X CS : 1,4 X 1,5 mm
    • Used for Submersible pressure gauge/consoles: internal swivel seal
  • nbr70

    Scuba O-Rings NBR Sh70-006

    5.90

    Scuba O-Rings NBR Sh70-006

    • Qty: 50 O-rings
    • ID X CS : 2,8 X 1,7 mm
    • Used for Common seal in regulator balance chambers; Power inflator stems; CO2 detonators; SAS gland seal
    • Similar to Sherwood part no: 6500-118, 5121-101
    • Similar to Mares part no: 46110101
  • nbr70

    Scuba O-Rings NBR Sh70-007

    7.90

    Scuba O-Rings NBR Sh70-007

    • Qty: 50 O-rings
    • ID X CS : 3,68 X 1,78 mm
    • Used for Regulator piston ring; small HP seal
    • Sherwood Part no :G007A
    • Similar to Scubapro part no: 01.050.120
  • nbr70

    Scuba O-rings NBR Sh70-1.70×1.00

    7.95

    Scuba O-rings NBR Sh70-1.70×1.00

    • Qty: 50 O-rings
    • NBR 70Sh 1.7mm x 1.00mm
  • nbr70

    Scuba O-rings NBR Sh70-2.5×1.00

    8.90

    Scuba O-rings NBR Sh70-2.5×1.00

    • Qty: 50 O-rings
    • ID x CS 2.50 x 1.00
    • Similar to SCUBAPRO part no: 01.050.363
    • Similar APEKS:AP5711
  • nbr70

    Scuba O-rings NBR Sh70-610

    8.35

    Scuba O-rings NBR Sh70-610

    • Qty: 50 O-rings
    • NBR 70Sh 
    • ID X CS: 6,75 mm x 1,78
    • similar to MARES part no: 46110106
  • nbr70

    Scuba O-rings NBR Sh70-9.75×1.78

    8.50

    Scuba O-rings NBR Sh70-9.75×1.78

    • Qty: 50 O-rings
    • ID X CS : 9,75  X 1,78 mm
  • nbr90

    Scuba O-rings NBR Sh90-611

    9.95

    Scuba O-rings NBR Sh90-611 (011-012)

    • Qty: 50 O-rings
    • ID X CS : 8,74  X 1,78 mm 7/16″
    • O-ring for HP Hose Male end
    • An intermediate size o-ring of 011 and 012.  
  • nbr90

    Scuba O-Rings NBR Sh90-614

    10.95

    Scuba O-Rings NBR Sh90-614 (111-112)

    • Qty: 50 O-rings
    • Intermediate size of 111-112 
    • ID X CS : 11,91  X 2,62
    • For Yoke to DIN inserts where 112 0r 111 don’t fit correctly 
1 2 3 9 10 11 12 13 14