H.P Valve seat for Calypso SG116126 1st Stage
November 24, 2020
Green Viton®O-rings-Sh75-028
December 1, 2020
Regulator Service kit for Oceanic 1st stage: CDx/DXi-DIN as kit no: 40.6132
23.99€ + vat
Regulator Service kit for Oceanic 1st stage: CDx/DXi-DIN as kit no: 40.6132
kit Part content list
- As diaphragm no: 6574
- As filter part no: 4546
- As o-ring part no: 6498
- As o-ring part no: 6374
- As o-ring part no: 2.011
- As o-ring part no: 2.012
- As HP seat part no: 6490
- As washer part no: 6777
In stock
Description
You may also like…
-
Cover tool for Scubapro 2nd stage R190,G250,G200,M5 **updated**
19.99€ + vatCover tool for Scubapro 2nd stage R190, G250, G200,M5.
-
Internal O-ring Scuba tool set for Scubapro MK5,MK6
19.99€ + vatInternal O-ring Scuba toolset for Scubapro MK5, MK6
Used to insert O-ring into body of a Scubapro MK10 first stage. Place 2 of the parts of this toolset on the top and bottom of the first stage body and push the O-ring into place with the rod of the set.
-
Scubapro DIN retaining knob O-ring installation bullet tool
4.99€ + vatScubapro DIN retaining knob O-ring installation bullet tool
DIN retaining knobs have big and sharp threats and putting an O-ring over these threats most of the time damages the O-ring.By using this small bullet the job is done quick while O-ring is still in perfect condition.
Related products
-
LP-Seat for Mares & Cressi sub 2nd Stage *New*
3.75€ + vatLP-Seat for Mares -Cressi sub 2nd Stage *New*
- Dimesnsions: ⌀ 7mm x 2 mm thickness
- Seat for 2ns stage regulators of Cressi as part no HZ742013
- Seat for Mares 2nd stages as part no: 46184062
-
Piston cup seat for Zeagle scuba 1st Stage regulators
7.99€ + vatPiston cup seat w/O’ring for Zeagle 1st Stage regulators
-
H.P Valve seat for APEKS 1st stage as SGAP1419
11.99€ + vatH.P. Valve seat for APEKS 1st Stage
** Bulk Discounts -5%,15%,25%,35% **- HP valve seat
- As part no SGAP1419
