Showing 1–15 of 49 results
-
1st stage Body of MK18 UL Scubapro as part no 10.755.101
65.00€ + vatBody of MK18 UL Scubapro as part no 10.755.101
-
2nd Stage Cover Tool Opener for Scubapro & Tusa gear *updated*
13.99€ + vat2nd Stage Cover Tool Opener for Scubapro & Tusa gear R095, R380, R390, S550, G500 & Tusa S60 *updated*
-
Adjusting Knob for APEKS gear part no SGAP2029-Aluminum**UPDATED**
21.99€ + vatAdjusting knob for APEKS as part number: AP2029- Marine Grade Aluminum
-
Aluminum Scuba tank Valve O’ring EPDM 85Sh-014
9.99€ + vatScuba tank valve O’ring EPDM 85Sh-014 (Hard) for Aluminum tanks
- Qty : 50 O-rings
- ID X CS : 12,42 X 1,78 mm
- Used for Std Yoke Regulator/K-Valve;+ 2nd stage inlet fittings; J-regulators; Common in aluminium cylinder valve to yoke regulator
-
Case for G500 Scubapro 2nd Stage as part no 11.600.006
19.99€ + vatCase for G500 Scubapro 2nd Stage as part no 11.600.006
-
Case for R095, R380,R290 Scubapro 2nd Stage as part no 11.380.021
19.00€ + vatCase for R095, R380,R290 Scubapro 2nd Stage as part no 11.380.021
-
CCR In line Scuba Tank Valve M25-DIN
32.99€ + vatCCR In-Line Scuba Tank Valve M25-DIN
***Last piece*** -
Clamp ring for BA Scubapro as part no 11.109.200
14.99€ + vatClamp ring for BA Scubapro as part no 11.109.200
-
Conical Air filter suitable for Aqualung-Tecline-Apeks-Zeagle 1st Stage
2.99€ + vatAir filter suitable for Aqualung- SG129151–Tecline–APEKS- Zeagle 1st Stage as SGAP1472
Bulk discounts available over 10,50,100,500 pcs- Conical bronze nickel-plated filter for Apeks
- As part no SG1472
-
Cup type Air filter for Poseidon as part no 1377
1.99€ + vatCup type filter for Poseidon 1st Stage as part no:1377
** Limited time offer **- Conical bronze filter
-
Cup type Air filter for Poseidon as part no 4552
2.20€ + vatCup type filter for Poseidon 1st Stage (Long) as part no:4552
** Limited time offer **
Conical bronze filter
-
Decal for Scubapro 2nd stage as part no 01.006.554
0.95€ + vatDecal for Scubapro 2nd stage as part no 01.006.554
-
Diaphragm for Mares & Aqualung-1st Stage SG 119159
6.99€ + vatDiaphragm for MARES Abyss and Aqualung 1st Stage as SG119159
- Used for Aqua 1st stage
- Φ 35mm x 1,6mm
-
Diaphragm Tool Retainer for Aqualung old models
11.99€ + vatTool for Aqualung Diaphragm retainer old models
- After removing the second stage cover place the tool on top of the ring that holds the diaphragm and turn counter-clockwise in order to remove the ring and change the diaphragm. Do not over tighten during assembly to avoid damaging the new diaphragm.
