- This tool makes the technicians live easy with installing the O-ring in the LP inflator connector in seconds!
Special Offers
Showing 1–15 of 28 results
- Add to cart
BCD Power Inflator Service Tool
15.99€ + vatBCD Power Inflator Tool
- 1/2″ hex wrench for the low pressure quick release nipple
- Special spanner with two bent tangs which fit the slots in the inlet valve cartridge assembly and facilitates its easy removal
- 3/8″ hex to keep the end of the valve spool in place while removing the plastic button from the cartridge valve assembly
- Handwheel nut driver used to service scuba valves.
- Add to cart
Bronze Air Manifold for Scuba applications-9 ports 1/4″ inlet-outlet
129.00€99.00€ + vatBronze Air Manifold 9 Port with 1/4″ inlet-outlet ports
- Bronze HP Air Manifold with 9 threads 1/4″ inlet-outlet ports
- Add to cart
Bull clip LP Hose O-ring installation tool
19.99€ + vatBull clip O-ring installation tool of LP BCD hose.
- Read more
CCR In line Scuba Tank Valve M25-DIN
49.99€37.99€ + vatCCR In-Line Scuba Tank Valve M25-DIN
* Price Until end of stock * - Add to cart
Conical Air filter for Aqualung 1st Stage 129209
6.99€5.99€ + vatAir filter for some Aqualung 1st Stage 129209 NEW
- Conical bronze nickel plated filter for some Aqualung models
- Add to cart
Conical Air filter suitable for Cressi Sub AC2 INT
3.25€2.99€ + vatAir filter suitable for Cressi Sub 1st Stage
- Conical bronze nickel-plated filter for Cressi Sub AC2 INT
- As part no HZ730188
- Height 18.25 mm x ear diameter 12.48 x opening hole Φ 3.65mm
- Add to cart
Conical Sintered Filter for Scubapro 1st Stage as part no 01-028-109
2.99€ + vatConical Sintered Filter for Scubapro 1st Stage as part no 01.028.109
- Conical bronze nickel-plated filter for Scubapro
- As part no 01-028-109
- Add to cart
Cover tool for Scubapro R095, R380, R390, S550, G500 & Tusa S60
15.99€ + vatCover tool for Scubapro R095, R380, R390, S550, G500 & Tusa S60
Limited time offer
- Add to cart
Diaphragm for Aqualung- MARES 1st Stage as 119159
9.99€6.99€ + vatDiaphragm for MARES Abyss and Aqualung 1st Stage as 119159
- Used for Aqualung 1st stage
- 35mm x 1,6mm
- Add to cart
H.P Piston Seat for Scubapro 1st stage as part no 10.102.103
5.00€3.99€ + vatH.P Piston Seat for Scubapro 1st stage as part no 10.102.103
- Select options
Handwheel Nylon Washer for scuba tank valves
0.55€ + vatHandwheel Nylon Washer for scuba tank valves
- Dimensions ⌀6.6 x ⌀ 17 x 1mm
- Add to cart
HP. PSG swivel with Viton®O-Rings for Pure Oxygen
6.99€5.99€ + vatHP. Swivel Spool with Viton®O-Rings for Pure oxygen use
- Genuine Viton® O-Rings Sh90
- Rated for Pure oxygen ✔
- Length 16 mm
- Chromed Brass Construction
- Replacement connector in case of leaking from gauge
- High-pressure swivel design
- Easy to replace
- Add to cart
New kit for APEKS 2nd Stages as AP0219 (updated)
12.99€ + vatService kit for APEKS 2nd Stages as AP0219 with EPDM+Viton O-rings
New Updated kit EPDM-Viton Bulk discounts -10% over 5 kits -15% over 10 kits -28% over 90 kits- Actual o-ring size chart included
- This O’ring kit covers the TX, ATX, XTX MTX-R and egress range of regulators, including T30, T50, T40D and T50D
- Part list :
- As O’ring part no AP1267 x 2 EPDM
- As O’ring part no AP1438 x 2 Viton
- As O’ring part no AP1154 x 3 EPDM
- As O’ring part no AP1409 EPDM
- As O’ring part no AP2041 EPDM
- As O’ring part no AP5711 Viton
- As Seating part no AP2034
- As O’ring part no AP1159 EPDM
- Add to cart
O-ring Service kit for JJ-CCR Re-breather
39.99€ + vatO-Ring Service kit for JJ-CCR rebreather
New Updated kit
- NBR -Viton-EPDM Sh70 O-rings ( 45 pieces)
- 1x Head to Scrubber connection O-ring 140 x 4
- 2x MAV Swivel O’rings 11.8 x 2.4
- 1 x Battery Cover O’ring 78 x 3
- 3 x Solenoid tube feed O’rings 10 x 2
- 1x ADV Lever fitting O’ring 6.78 x 1.78
- 8 x Hose ends -Loop O’rings 32 x 2
- 1 x ADV 90 Elbow O-ring 2.9 x 1.78
- 4 x Banjo Bolt (old style) O’ring 9.52 x 1.78
- 1x Solenoid tube End O’ring 5 x 1.5
- 4 x MAV button spine O’ring 3.3 x 1.6
- 6x Banjo Bolt (New style) O’ring 8x 2
- 3 x Banjo Bolt to t-piece 7.3 x 2.4
- 2 x Delrin bottom plate to canister O-ring 160 x 3
- 2 x T-piece to lung connection O-ring 40 x 3
- 2 x Delrin lung fitting O-ring 50 x 2
- 2 x HUD Button O-ring
- 2x Head to Canister O-ring 139.29 x 3.53
- Read more
Scuba Tank Valve 3/4″ NPSM
49.99€35.99€ + vatScuba Tank Valve 3/4″ NPSM
Prices until end of stock- Pipe and Yoke Insert included
1 2