Showing 16–30 of 66 results
-
Nut for scuba tank valves Handwheels
4.49€ + vatNut for scuba tank valves Handwheels 3/16″
- Chromed brass
-
O-Ring Pick Metallic Tool- Ball End 1mm-1.2mm
15.99€ + vatMetallic O-ring pick Tool 2 sided Ball End 1mm/1.2mm (non-scratch tool)
-
O-ring Service kit for scuba Tank Valves
5.50€ + vatO-ring Service Kit for Tank Valves *updated*
- For air use Only
- NBR Sh90-Sh70 (8 pcs)
- O-rings : 112 x 2pcs, 010, 011
- 012 x 2pcs, 015, 214
-
Safety Valve for First Stage Automatic ARGON ML / SBT
15.00€ + vatSafety Valve for First Stage Automatic ARGON ML / SBT
- Safety valve Specification:– safety (relief) valve for 1st stage argon,
– opening pressure 13 ATM,
– closing pressure 11 ATM.The safety valve mounted on the first stage of the regulator, as the name suggests, is used to protect subsequent devices in the event of a sudden, uncontrolled increase in intermediate pressure. The valve has an opening pressure of 13 ATM, which means that an increase above this value will cause the O-ring to be blown and excess gas will flow out.If the intermediate pressure drops below 11 ATM, the valve will close.
- Safety valve Specification:– safety (relief) valve for 1st stage argon,
-
Schrader Valve Stem for BCD Inflators
0.79€ + vatSchrader Valve Stem for BCD Inflator Head BC
- This is a replacement Schrader Valve Stem for you BC Inflator and other items
- BC Inflator Head
- Inner Tubes for dive floats, etc
- Bike Tires
- Car Tires
-
Scuba Bonnet Nut O-Ring NBR-70Sh-20 x 2
13.75€ + vatScuba Bonnet Nut O-Ring NBR-70Sh-20 x 2
- Qty: 50 O-rings
- NBR Sh70- ID X CS : 20 X 2
- Ball arms of underwater photography gear
-
Scuba Dive O-rings NBR 90Sh-112 DIN valve
9.99€ + vatScuba DIN O-rings NBR 90Sh-112 for tank valves
- Qty: 50 O-rings
- ID X CS : 12,3 X 2,6 mm
- Used for standard DIN Regulator Valve; Steel tank valve; Basal DIN seal
- As Mares part no 46110117
-
Scuba Dive O’Rings EPDM 85Sh-010
11.90€ + vatDive O’Rings EPDM 85Sh- 010(Hard)
- ID X CS : 6,07 X 1,78 mm
- Qty:50 O-rings
-
Scuba Dive O’Rings EPDM 85Sh-015
12.40€ + vatDive O’Rings EPDM 85Sh-015(Hard)
- Qty : 50 O-rings
- ID X CS : 13,9 X 1,7 mm
- Used for Tank Valve Bonnet Nut;1st stage inlet fittings; HP seal retainer seal; J valve module; Valve HP plugs; 2nd stage barrel and housing plug seals
- As Oceanic o-ring part no 6508
-
Scuba O-Ring NBR-70Sh-32 x 2
0.25€ + vatScuba O-Ring NBR-70Sh-32 x 2
- Qty: 1 O-rings
- NBR Sh70- ID X CS : 32X 2 mm
-
Scuba O-Ring Silicon-70Sh-20.29 x 2.62
18.00€ + vatScuba Silicone O-Ring-70Sh-20.29 x 2.62
- Qty: 50 O-rings
- Sh70- ID X CS : 20.29 X 2.62 mm
-
Scuba O-Ring Silicon-70Sh-3.1mm x 1.6mm
0.35€ + vatScuba Silicone O-Ring-70Sh-3.10 x 1.60
- Qty: 1 O-rings
- NBR Sh70- ID X CS : 3.1X 1.60 mm
-
Scuba O-Ring Silicon-70Sh-613
18.00€ + vatScuba Silicone O-Ring-70Sh-613
- Qty: 50 O-rings
- Sh70- ID X CS : 9.92 X 2.62 mm