O-rings for Sherwood
Showing 1–15 of 23 results
- Add to cart
Actual Size Scuba O-ring Identification Working Mat -115 sizes
29.00€ + vatScuba O-ring Identification Working Mat-115 sizes(Laminated poster with transparent plastic pad )
This High resolution laminated O-ring identification chart with a silicone mat. Contains all Apeks, Scubapro, Mares, Dive Rite, Cressi Sub, Aqualung, Beuchat, JJ-CCR and dive computer o-rings (Oceanic, Aqualung, Suunto) as well as the most common o-rings used in scuba dive, like Tank neck, Tank valve, LP & HP Hose and BCD o-rings. Just place the poster under the transparent plastic mat and you have the perfect working area in your workshop.No need to look around to identify any o-ring. Is in front of your eyes all time.
- Actual o-ring size chart size 35 x 65 cm
- Transparent plastic working mat size 40 x 70cm
- Select options
Beuchat O-Rings NBR 70Sh-part no:225069-Sherwood 6110-123
14.90€ + vatO-Rings NBR 70Sh- as Beuchat part no:225069 & Sherwood 6110-123
- Qty: 50 O-rings
- Select options
EPDM O-rings 70Sh as Apeks AP1267/Aqualung 124706/Sherwood 5121-106
13.99€ + vatScuba O-Rings EPDM 70Sh-Apeks AP1267-Aqualung 124706-Sherwood 5121-106
- Qty: 50 O-rings
- Used for 1st stage inlet fittings; HP seal retainer seal; J valve module; Valve HP plugs; 2nd stage barrel and housing plug seals
- Select options
Male Hose end Scuba O-rings EPDM Sh70-as Mares part no:46110107/Sherwood 5121-104
13.95€ + vatScuba O-rings EPDM Sh70- as Mares part no:46110107/Sherwood 5121-104
- Qty: 50 O-rings
- Used For Regulator hose: male end; Regulator port plugs LP; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets; Piston HP barrel BC hose coupler
- Select options
O-Rings EPDM 70Sh as Mares part no 46110247 & Sherwood part 6400-138
15.60€ + vatScuba O-Rings EPDM 70Sh as Mares part no 46110247 & Sherwood part 6400-138
- Qty : 50 O-rings
- Select options
O-Rings EPDM 70Sh-as MARES part no: 46110211 & Sherwood 5121-105
12.90€ + vatScuba O-Rings EPDM 70Sh as Mares Part no 46110211 and Sherwood 5121-105
- Qty: 50 O-rings
- Select options
O-rings EPDM Sh70-as Apeks AP1410 -Aqualung 213716-Sherwood part no 6400-115
13.80€ + vatScuba O-rings EPDM Sh70-Apeks AP1410 -Aqualung 213716-Sherwood part no 6400-113
- Qty : 50 O-rings
- Used for 1/2 LP Large Port;Piston seat seal; Survivair manifolds; Power inflator seals; Common in aluminium cylinder valve to yoke regulator seals
- Select options
O-rings for Scubapro part no :01.050.160 & Sherwood part no 6400-125
9.90€ + vatO-rings for Scubapro part no:01.050.160 & Sherwood part no 6400-125
- Qty : 50 O-rings
- Select options
O-rings for Scubapro part no:01.050.177 Sherwood 5110-107
14.75€ + vatO-rings for Scubapro part no: 01.050.177, Sherwood 5110-107
- Qty : 50 O-rings
- EPDM Sh70
- Select options
Scuba Dive O-rings for Sherwood as part no 5110-109
18.90€ + vatScuba Dive O-rings for Sherwood as part no 5110-109
- Qty in box: 50 O-rings
- NBR Sh70-025
- Select options
Scuba O-Rings EPDM 70Sh-as APEKS AP1154, Aqualung 444243,Sherwood 5121-103
11.95€ + vatScuba O-Rings EPDM 70Sh-as AP1154-Aqualung 444243
- Qty : 50 O-rings
- Used for Regulator hose: swivel end; Piston barrel HP seal; 2nd stage orifice seal; Valve stem seals; Early calypso Regulators; Power inflators stems;
- As MARES part no: 46110205
- Select options
Scuba O-Rings EPDM 70Sh-As Mares part no: 46110203 & Sherwood 6110-129
12.50€ + vatScuba O-Rings EPDM 70Sh-As Mares part no: 46110203 & Sherwood 6110-129
- Qty: 50 O-rings
- Select options
Scuba O-Rings EPDM-70Sh-as AP1420 & Sherwood 6110-125
13.75€ + vatScuba O-Rings EPDM-70Sh-as AP1420 & Sherwood 6110-125
- Qty: 50 O-rings
- Used for Piston cap seals (USD); SAS 1st stage
- Select options
Scuba O-rings NBR 70Sh-004
10.00€ + vatScuba O-rings NBR Sh70-004
- Qty: 50 O-rings
- 1,78 mm X 1,78mm
- Used for Older internal swivel seal models; AT-PAC BC’s Power inflator control
- Similar to Sherwood part no: 6121-122
- Select options
Scuba O-Rings NBR 70Sh-106
12.99€ + vatScuba O-Rings NBR 70Sh-106
- Qty: 50 O-rings
- ID X CS : 4,42 X 2,62 mm
- Similar to Sherwood part no: 5121-102
1 2