Showing 16–30 of 62 results
-
Disc Air filter for Aqua 1st Stage SG113616
4.60€ + vatDisc Air filter for Aqua 1st Stage part no SG113616 NEW
- Disc bronze nickel-plated filter for 1st stages Aqua gear.
- Dimensions: 8.82mm Φ x 2.00mm Thickness
-
Dump Valve Membrane for Aqualung Φ 33.5mm x 3.00 mm thickness as part no 15714
2.99€ + vatDump Valve Membrane for Aqualung BCD Φ 33.5mm x 3.00 mm thickness as part no:15714
Dimensions: Diameter Φ 33.5mm x 3.00 mm thickness
-
EPDM 70Sh-for APEKS SG1154, Aqualung SG444243
11.95€ + vatScuba O-Rings EPDM 70Sh-as SG-AP1154-Aqua SG-444243
- Qty : 50 O-rings
- Used for Regulator hose: swivel end; Piston barrel HP seal; 2nd stage orifice seal; Valve stem seals; Early calypso Regulators; Power inflators stems;
- As MARES part no: SG-46110205
-
EPDM O-rings 70Sh for AP SGAP1267 and Aqua SG124706
11.99€ + vatEPDM 70Sh O-rings for AP and Aqua as SG-AP1267,SG-124706
- Qty: 50 O-rings
- Used for 1st stage inlet fittings; HP seal retainer seal; J valve module; Valve HP plugs; 2nd stage barrel and housing plug seals
-
EPDM Sh70-O-Rings for AP/AQUA part no SGAP1409/SG124703
11.95€ + vatScuba O-rings EPDM Sh70-for AP and AQUA part no: SGAP1409/SG124703
- Qty: 50 O-rings
- Used For Regulator hose: male end; Regulator port plugs LP; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets; Piston HP barrel BC hose coupler
-
H.P Valve seat for 1st Stage Aqualung part no: SG124624
13.99€ + vatScubaGaskets H.P. Valve seat for Aqualung 1st Stage no: SG124624
**Bulk Discounts for 20pcs & 50 pcs**- HP valve seat
- For Aqua part no SG124624
-
H.P Valve seat for Calypso SG116126 1st Stage
4.99€ + vatH.P. Valve seat for Calypso 1st Stage as part no: SG116126
**Bulk Discount over 20 pcs**- HP valve seat
-
HP seat installation-removal tool for Aqualung Legend
15.00€ + vatHP seat installation-removal tool for Aqua Legend
- Used for installing and removing the HP seat of Aqua Legend first stage.
-
HP valve seat installation-removal tool for Aqualung
9.99€ + vatHP valve seat installation-removal tool for Aqualung 1st stages
New Product
- Used for installing and removing the HP seat from the Titan LX Supreme housing first stage body
-
Membran for AquaLung-SeaQuest Pro QD i3 Inflator as part no 15115
5.00€ + vatMembran for AquaLung-SeaQuest Pro QD i3 Inflator as part no 15115
-
Multi-Tool for Aqualung Gear
45.00€ + vatMulti-ScubaTool for Aqualung Gear.
- With high-quality stainless steel pins that never fail.
- Suitable for Pioneer, Aquarius, and Nordic 1st stages
-
Nylon washer for Aqua 1st Stage part no SG119143
0.99€ + vatNylon washer for Aqua 1st Stage part no SG119143
- First stage part
- ID X CS X TH: 23 mm x 16 mm x 0.50mm
-
Nylon washer for Aqua 1st Stage part no SG127568
0.99€ + vatNylon washer for Aqua 1st Stage as part no SG127568
- First stage part
- ID X CS X TH: 34 mm x 26.4 mm x 1.0 mm
-
O-Ring Pick Metallic Tool- Ball End 1mm-1.2mm
15.99€ + vatMetallic O-ring pick Tool 2 sided Ball End 1mm/1.2mm (non-scratch tool)
-
O-rings NBR Sh70 for Aqua part no SG122135
17.99€ + vatNBR O’rings Sh70- for Aqua part no SG122135
- Qty: 50 O-rings
