Sherwood O-rings

Showing 1–15 of 28 results

  • Genuine VITON® Green Sh90-112

    • VITON®-Sh90-112 (coming soon)
    • 10 O-rings
    • ID X CS : 12,3 X 2,6 mm
    • Used for Steel tank valve; Basal DIN seal
    • Similar Scubapro part no :01.050.405
  • O-rings for Suunto Zoop Novo

    8.90

    O-rings for Suunto Zoop Novo

    • Qty in  box: 10 O-rings
    • NBR Sh70-025
    • ID X CS : 29,87 X 1,78 mm
    • Used for Gauge lenses
    • Similar to Sherwood part no :5110-109
    • Similar to Suunto Zoop Novo
  • Scuba Dive O-rings NBR 90Sh-112

    7.85

    Scuba Dive O-rings NBR 90Sh-112

    • Qty: 50 O-rings
    • ID X CS : 12,3 X 2,6 mm
    • Used for standard DIN Regulator Valve ;Steel tank valve; Basal DIN seal
  • Scuba Dive O-rings NBR Sh70-025

    14.90

    Scuba Dive O-rings NBR Sh70-025

    • Qty in  box: 50 O-rings
    • NBR Sh70-025
    • ID X CS : 29,87 X 1,78 mm
    • Used for Gauge lenses
    • Similar to Sherwood part no :5110-109
  • Scuba O-Rings EPDM 70Sh-022

    17.40

    Scuba O-Rings EPDM 70Sh-022

    • Qty : 50 O-rings
    • ID X CS : 25,12 X 1,78 mm
    • Similar to SHERWOOD :5110-107
  • Scuba O-Rings EPDM 70Sh-111

    14.60

    Scuba O-Rings EPDM 70Sh-111

    • Qty : 50 O-rings
    • ID X CS : 10,77 X 2,62 mm
    • Similar to Sherwood part no: 6400-138
  • Scuba O-rings EPDM Sh70-011

    12.95

    Scuba O-rings EPDM Sh70-011

    • Qty : 50 O-rings
    • ID X CS : 7,65 X 1,78 mm
    • Similar to Sherwood part no:5121-104
    • Similar to Mares part no:46110107
    • Similar to APEKS :AP1409
  • Scuba O-rings NBR 70Sh-004

    7.90

    Scuba O-rings NBR 70-004

    • Qty: 50 O-rings
    • 1,78 mm X 1,78mm
    • Used for Older internal swivel seal models; AT-PAC BC’s Power inflator control
    • Similar to Apeks :AP 6403
    • Similar to Sherwood part no: 6121-122
  • Scuba O-Rings NBR 70Sh-010

    5.95

    Scuba O-Rings NBR 70Sh-010

    • Qty : 50 O-rings
    • ID X CS : 6,0 X 1,7 mm
    • Used for Regulator hose: swivel end; Piston barrel HP seal; 2nd stage orifice seal; Valve stem seals; Early calypso Regulators; Power inflators stems;
    • Similar to Sherwood parts no: 5121-103,6110-119,6161-101,6121-137
  • Scuba O-Rings NBR 70Sh-011

    6.90

    Scuba O-Rings NBR 70Sh-011

    • Qty: 50 O-rings
    • ID X CS : 7,6 X 1,7 mm
    • Used For Regulator hose: male end; Regulator port plugs LP; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets; Piston HP barrel BC hose coupler
    • Similar to Sherwood part no:5121 104
    • Similar to Mares part no:46110107
  • Scuba O-Rings NBR 70Sh-013

    9.90

    Scuba O-Rings NBR 70Sh-013

    • Qty: 50 O-rings
    • ID X CS : 10,8 X 1,7 mm
    • Used For 1/2″ LP large Port ,Reg male end hose
    • Similar to Sherwood part no: 6400-115
  • Scuba O-Rings NBR 70Sh-014

    6.95

    Scuba O-Rings NBR 70Sh-014

    • Qty : 50 O-rings
    • ID X CS : 12,4 X 1,7 mm
    • Used for + 2nd stage inlet fittings; J-regulators; Common in aluminium cylinder valve to yoke regulator
    • Similar to Sherwood part no: 5121-105
  • Scuba O-Rings NBR 70Sh-015

    7.90

    Scuba O-Rings NBR 70Sh-015

    • Qty: 50 O-rings
    • ID X CS : 14 X 1,78
    • Used for 1st stage inlet fittings; HP seal retainer seal; J valve module; Valve HP plugs; 2nd stage barrel and housing plug seals
    • Similar to Sherwood part no :5121-106
  • Scuba O-Rings NBR 70Sh-016

    8.90

    Scuba O-Rings NBR 70Sh-016

    • Qty : 50 O-rings
    • ID X CS : 15,6 X 1,78
    • Used for Old 1/2″ NPS valves; 2nd stage inlet fittings; SAS LP seats; J-regulators; HP module seal; Valve HP plugs; 2nd stage barrel and housing plug seals; Paintball Guns; M18X1,5 Valves
    • Similar Sherwood part no : 6400-125, 6500-129
    • Similar Scubapro part no: 01.050.160
    • For Battery cap of Perdix AI transmitter 
  • Scuba O-Rings NBR 70Sh-020

    9.50

    Scuba O-Rings NBR 70Sh-020

    • Qty: 50 O-rings
    • ID X CS : 21,95 X 1,78 mm
    • Used for Regulator piston ring (USD & SAS)
    • Similar to Sherwood part no: 6400-102
1 2