Scuba O-Rings NBR Sh70
Showing 16–30 of 61 results
- Select options
Scuba O-rings NBR 70Sh-004
10.00€ + vatScuba O-rings NBR Sh70-004
- Qty: 50 O-rings
- 1,78 mm X 1,78mm
- Used for Older internal swivel seal models; AT-PAC BC’s Power inflator control
- Similar to Sherwood part no: 6121-122
- Select options
Scuba O-Rings NBR 70Sh-005
12.00€ + vatScuba O-Rings NBR 70Sh-005
- Qty: 50 O-rings
- ID X CS : 2,57 X 1,78 mm
- Seal used in older depth and tank “stem” gauges
- Select options
Scuba O-Rings NBR 70Sh-008
9.00€ + vatScuba O-Rings NBR 70Sh-008
- Qty: 50 O-rings
- ID X CS : 4,4 X 1,7 mm
- Used for Sonic regulators; Regulator piston ring; small HP sea
- Sherwood part no:6110-129
- Select options
Scuba O-Rings NBR 70Sh-009
9.00€ + vatScuba O-Rings NBR 70Sh-009
- Qty: 50 O-rings
- NBR Sh70-009
- ID X CS : 5,2 X 1,7 mm
- Used for Seal in open-tube depth gauges
- Sherwood part no : 6121-135
- Select options
Scuba O-Rings NBR 70Sh-010
9.00€ + vatScuba O-Rings NBR 70Sh-010
- Qty : 50 O-rings
- ID X CS : 6,0 X 1,7 mm
- Used for Regulator hose: swivel end; Piston barrel HP seal; 2nd stage orifice seal; Valve stem seals; Early calypso Regulators; Power inflators stems;
- Similar to Sherwood parts no: 5121-103,6110-119,6161-101,6121-137
- Select options
Scuba O-Rings NBR 70Sh-011
9.00€ + vatScuba O-Rings NBR 70Sh-011
- Qty: 50 O-rings
- ID X CS : 7,6 X 1,7 mm
- Used For Regulator hose: male end; Regulator port plugs LP; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets; Piston HP barrel BC hose coupler
- As Sherwood part no:5121 104
- As Mares part no:46110107
- Select options
Scuba O-Rings NBR 70Sh-012
9.00€ + vatScuba O-Rings NBR 70Sh-012
- Qty: 50 O-ring
- ID X CS : 9,2 X 1,7 mm
- Used For Console/gauge hoses: male end; Underneath filter; Hose adapters; HP seat seal; LP swivel cap; HP port plugs
- Similar to Mares part no: 46110110
- Select options
Scuba O-Rings NBR 70Sh-013
9.00€ + vatScuba O-Rings NBR 70Sh-013
- Qty: 50 O-rings
- ID X CS : 10,8 X 1,7 mm
- Used For 1/2″ LP large Port ,Reg male end hose
- Similar to Sherwood part no: 6400-115
- Select options
Scuba O-Rings NBR 70Sh-014
9.00€ + vatScuba O-Rings NBR 70Sh-014
- Qty : 50 O-rings
- ID X CS : 12,4 X 1,7 mm
- Used for + 2nd stage inlet fittings; J-regulators; Common in aluminum cylinder valve to yoke regulator
- Similar to Sherwood part no: 5121-105
- Select options
Scuba O-Rings NBR 70Sh-015
9.00€ + vatScuba O-Rings NBR 70Sh-015
- Qty: 50 O-rings
- ID X CS : 14 X 1,78
- Used for 1st stage inlet fittings; HP seal retainer seal; J valve module; Valve HP plugs; 2nd stage barrel and housing plug seals
- Similar to Sherwood part no :5121-106
- Select options
Scuba O-Rings NBR 70Sh-016
9.99€ + vatScuba O-Rings NBR 70Sh-016
- Qty : 50 O-rings
- ID X CS : 15,6 X 1,78
- Used for Old 1/2″ NPS valves; 2nd stage inlet fittings; SAS LP seats; J-regulators; HP module seal; Valve HP plugs; 2nd stage barrel and housing plug seals; Paintball Guns;
- As Sherwood part no : 6400-125, 6500-129
- As MARES part no : 46110220
- For Battery cap of Perdix AI transmitter
- Select options
Scuba O-Rings NBR 70Sh-017
14.99€ + vatScuba O-Rings NBR 70Sh-017
- Qty: 50 O-rings
- ID X CS : 17,17 X 1,78
- Used for Regulator piston ring and cap; Dacor HP module
- Select options
Scuba O-Rings NBR 70Sh-018
12.25€ + vatScuba O-Rings NBR 70Sh-018
- Qty:50 O-rings
- ID X CS : 18,77 X 1,78 mm
- Used for Regulator piston ring (1970’s); 2nd stage inlet seal; Body plug seal
- Select options
Scuba O-Rings NBR 70Sh-019
15.99€ + vatScuba O-Rings NBR 70Sh-019
- Qty: 50 O-rings
- ID X CS : 20,3 X 1,7 mm
- Used for Healthway / USD / Sherwood industrial piston regulator
- Select options
Scuba O-Rings NBR 70Sh-020
15.99€ + vatScuba O-Rings NBR 70Sh-020
- Qty: 50 O-rings
- ID X CS : 21,95 X 1,78 mm
- Used for Regulator piston ring (USD & SAS)
- Similar to Sherwood part no: 6400-102
