High-Pressure extrusion resistant type NBR O-Rings
NBR (Nitrile), chemically, is a copolymer of butadiene and acrylonitrile.
Due to its excellent resistance to petroleum products, and its ability to be compounded for service over a temperature range of -35°C to +120°C (-30°F to +250°F), Nitrile /NBR is the most widely used elastomer in the seal industry today. Also many military rubber specifications for fuel and oil resistant O-rings require nitrile based compounds.
Nitrile compounds do not possess good resistance to ozone, sunlight, or weather. They should not be stored near electric motors or other ozone generating equipment.
Showing 1–15 of 37 results
-
Actual Size Scuba dive O-ring identification mat 115 o-ring sizes
39.99€ + vatScuba O-ring Identification bench mat-115 O-ring sizes (Working mat)
Comming on 17/12/21Rubber-neopen O-ring identification chart working mat. Contain all APEKS, Scubapro, Mares, Dive Rite, Cressi sub, Aqualung, Beuchat, JJ-CCR, and dive computer o-rings (Oceanic, Aqua, Suunto) as well as the most common o-rings used in scuba dive, like Tank neck, Tank valve, LP & HP Hose and BCD o-rings.A helpful tool for every scuba technician.
- Rubber pad 2mm thickness
- Size 35 x 65cm
-
O-rings For Puracon Valve L&W Compressors NBR 90Sh
5.00€ + vatO-Rings for Puracon Valve L&W compressor
- Qty: 1 O-Ring
- Used for Puracon air monitoring unit of L&W compressors
-
Scuba O-Rings NBR 90Sh-001
10.00€ + vatScuba O-Rings NBR 90Sh-001
- Qty : 50 O-rings
- ID X CS : 0,7 X 1,0 mm
-
Scuba Dive O-rings NBR 90Sh-112 DIN valve
11.99€ + vatScuba DIN O-rings NBR 90Sh-112 for tank valves
- Qty: 50 O-rings
- ID X CS : 12,3 X 2,6 mm
- Used for standard DIN Regulator Valve; Steel tank valve; Basal DIN seal
-
Scuba O-Ring NBR 90Sh-002
10.00€ + vatScuba O-Ring NBR 90Sh-002
- Qty :50 O-rings
- ID X CS : 1,1 X 1,2 mm
-
Scuba O-Ring NBR 90Sh-005
12.99€ + vatScuba O-Ring NBR 90Sh-005
- Qty: 50 O-rings
- ID X CS : 2,5 X 1,78 mm
- Used for Seal used in older depth and tank “stem” gauges
-
Scuba O-Ring NBR 90Sh-006
9.99€ + vatScuba O-Ring NBR 90Sh-006
- Qty : 50 O-rings
- ID X CS : 2,8 X 1,7 mm
- Used for Common seal in regulator balance chambers; Power inflator stems; CO2 detonators; SAS gland seal
-
Scuba O-Ring NBR 90Sh-007
9.99€ + vatScuba O-Ring NBR 90Sh-007
- Qty: 50 O-rings
- ID X CS : 3,6 X 1,7 mm
- Used for Regulator piston ring; small HP seal
-
Scuba O-Ring NBR 90Sh-008
10.00€ + vatScuba O-Ring NBR 90Sh-008
- Qty : 50 O-rings
- ID X CS : 4,47 X 1,78 mm
- Used for Sonic regulators; Regulator piston ring; small HP sea
-
Scuba O-Ring NBR 90Sh-009
8.90€ + vatScuba O-Ring NBR 90Sh-009
- Qty: 50 O-rings
- ID X CS : 5,2 X 1,7 mm
- Used for Seal in open-tube depth gauges
-
Scuba O-Ring NBR 90Sh-010
9.99€ + vatScuba O-Ring NBR 90Sh-010
- Qty : 50 O-rings
- ID X CS : 6,0 X 1,7 mm
- Used for Regulator hose: swivel end; Piston barrel HP seal; 2nd stage orifice seal; Valve stem seals; Early calypso Regulators; Power inflators stems
-
Scuba O-Rings 90Sh-018
15.00€ + vatScuba O-Rings 90Sh-018
- Qty: 50 O-rings
- ID X CS : 18,7 X 1,78 mm
- Used for Regulator piston ring (1970’s); 2nd stage inlet seal; Body plug seal
-
Scuba O-Rings NBR 90Sh-003 for SPG Swivel
8.25€ + vatScuba O-Rings NBR 90Sh-003 for SPG Swivel
- Qty : 50 O-rings
- ID X CS : 1,4 X 1,5 mm
- Used for Submersible pressure gauge/consoles: internal swivel seal
-
Scuba O-Rings NBR 90Sh-004
9.25€ + vatScuba O-Rings NBR 90Sh-004
- Qty: 50
- ID X CS : 1,78 X 1,78 mm
- Used for Older internal swivel seal models; AT-PAC BC’s Power inflator control
-
Scuba O-rings NBR 90Sh-011
9.85€ + vatScuba O-rings NBR 90Sh-011
- Qty : 50 O-rings
- ID X CS : 7,65 X 1,78 mm
- Used for standard 3/8″ LP Port;Regulator hose: male end; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets; Piston HP barrel BC hose coupler
