Nitrile (NBR)
NBR Sh70 – Sh90 O-rings
NBR (Nitrile), chemically, is a copolymer of butadiene and acrylonitrile.
Due to its excellent resistance to petroleum products, and its ability to be compounded for service over a temperature range of -35°C to +120°C (-30°F to +250°F), Nitrile /NBR is the most widely used elastomer in the seal industry today. Also many military rubber specifications for fuel and oil resistant O-rings require nitrile based compounds.
Nitrile compounds do not possess good resistance to ozone, sunlight, or weather. They should not be stored near electric motors or other ozone generating equipment.
Showing 1–15 of 104 results
-
Read more
Actual Size Scuba dive O-ring identification mat 115 o-ring sizes
44.99€ + vatScuba O-ring Identification Chart-115 O-ring sizes(Working mat)
Rubber-neopen O-ring identification chart working mat. Contain all Apeks, Scubapro, Mares, Dive Rite, Cressi sub, Aqualung, Beuchat, JJ-CCR, and dive computer o-rings (Oceanic, Aqualung, Suunto) as well as the most common o-rings used in scuba dive, like Tank neck, Tank valve, LP & HP Hose and BCD o-rings.A helpful tool for every scuba technician.
- Rubber pad 2mm thickness
- Size 35 x 65cm
-
Select options
BCD Hose O-Rings NBR 70Sh-011
8.95€ + vatBCD Hose O-Rings NBR 70Sh-011
- Qty: 50 O-rings
- ID X CS : 7,6 X 1,7 mm
- Used For Regulator hose: male end; Regulator port plugs LP; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets; Piston HP barrel BC hose coupler
-
Select options
Hose O-Rings NBR 70Sh-7.50mmx1.50mm
12.90€ + vatHose O-Rings NBR 70Sh-7.50 mm x 1.50 mm
- Qty : 50 O-rings
- ID X CS : 7,5 X 1,5 mm
- Inflator Hose O-Ring
-
Select options
LPI. Low presure Inflator Hose O-rings-610
8.00€ + vatLow Pressure Inflator hose bull clip O-ring for BCD’s NBR Sh70-610
- Qty: 50 O-rings
- NBR 70Sh
- For Bull clip inflator BCD hose
- ID X CS: 6,75 mm x 1,78
-
Add to cart
NBR O-rings Sh70-155 x 3.53
11.90€ + vatNBR O-rings Sh70-155mm x 3.53mm
- Qty: 1 O-rings
- ID X CS : 155 X 3.53 mm
-
Read more
NBR O-rings Sh70-217
12.90€ + vatNBR O-rings Sh70-217
- Qty: 50 O-rings
- ID X CS : 29,74 X 3,53 mm
- As Scubapro part no:01.050.268
- Add to cart
-
Select options
O-Rings for NBR 70Sh-2.40×1.90
12.00€ + vatScuba O-Rings NBR 70Sh 2.4 x 1.9
- Qty: 50 O-rings
- ID X CS : 2,40 X 1,90 mm
-
Select options
O-rings For Puracon Valve L&W Compressors NBR 90Sh
5.00€ + vatO-Rings for Puracon Valve L&W compressor
- Qty: 1 O-Ring
- Used for Puracon air monitoring unit of L&W compressors
-
Select options
O-Rings for Swivels NBR Sh70-003
7.25€ + vatO-Rings for swivels NBR Sh70 003
- Qty : 50 O-rings
- ID X CS : 1,4 X 1,5 mm
- Used for Submersible pressure gauge/consoles: internal swivel seal
-
Select options
O-Rings NBR 70Sh-15mm x 1.5mm
11.90€ + vatScuba O-Rings NBR 70Sh-15 x 1.5mm
- Qty : 50 O-rings
- ID X CS : 15 X 1,5 mm
-
Select options
Scuba Bonnet Nut O-Ring NBR-70Sh-20 x 2
13.75€ + vatScuba Bonnet Nut O-Ring NBR-70Sh-20 x 2
- Qty: 50 O-rings
- NBR Sh70- ID X CS : 20 X 2 mm
- Used on scuba tank valves
-
Select options
Scuba O-Rings NBR 90Sh-001
10.00€ + vatScuba O-Rings NBR 90Sh-001
- Qty : 50 O-rings
- ID X CS : 0,7 X 1,0 mm
-
Select options
Scuba Dive O-rings NBR 90Sh-112 DIN valve
11.99€ + vatScuba DIN O-rings NBR 90Sh-112 for tank valves
- Qty: 50 O-rings
- ID X CS : 12,3 X 2,6 mm
- Used for standard DIN Regulator Valve; Steel tank valve; Basal DIN seal
-
Select options
Scuba Dive O-rings NBR Sh70-025
11.99€ + vatScuba Dive O-rings NBR Sh70-025
- Qty in box: 50 O-rings
- NBR Sh70-025
- ID X CS : 29,87 X 1,78 mm
- Used for Gauge lenses
