Scuba O-Rings NBR Sh90

Showing 16–30 of 40 results

  • nbr90

    Scuba O-Rings NBR 90Sh-003

    5.95

    Scuba O-Rings NBR 90Sh-003

    • Qty : 50 O-rings
    • ID X CS : 1,4 X 1,5 mm
    • Used for Submersible pressure gauge/consoles: internal swivel seal
    • Similar to Scubapro part 01.050.108
  • nbr90

    Scuba O-Rings NBR 90Sh-004

    9.90

    Scuba O-Rings NBR 90Sh-004

    • Qty: 50
    • ID X CS : 1,78 X 1,78 mm
    • Used for Older internal swivel seal models; AT-PAC BC’s Power inflator control
    • Similar to APEKS :AP6403
  • nbr90

    Scuba O-rings NBR 90Sh-011

    6.85

    Scuba O-rings NBR 90Sh-011

    • Qty : 50 O-rings 
    • ID X CS : 7,65 X 1,78 mm
    • Used for standard 3/8″ LP Port;Regulator hose: male end; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets; Piston HP barrel BC hose coupler
    • Similar to Scubapro part no :01.050.424
  • nbr90

    Scuba O-rings NBR 90Sh-012

    7.65

    Scuba O-rings NBR 90Sh-012

    • Qty : 50 O-rings 
    • ID X CS : 9,2 X 1,7 mm
    • Used for 7/16″ HP Port/Hose Manifold/Console/gauge hoses: male end; Underneath filter; Hose adapters; HP seat seal; LP swivel cap; HP port plugs 
    • Suunto Wireless transmitter to 1st stage interface
    • Similar to Scubapro : 01.050.425
  • nbr90

    Scuba O-Rings NBR 90Sh-013

    8.90

    Scuba O-Rings NBR 90Sh-013

    • Qty : 50 O-rings 
    • ID X CS : 10,8 X 1,7 mm
    • Used for 1/2 LP Large Port;Piston seat seal; Survivair manifolds; Power inflator seals; Common in aluminium cylinder valve to yoke regulator seals
    • Same size as Scubapro part no:01.050.147
  • nbr90

    Scuba O-rings NBR 90Sh-014

    12.90

    Scuba O-rings NBR 90Sh-014

    • Qty : 100 O-rings
    • ID X CS : 12,4 X 1,7 mm
    • Used for Std Yoke Regulator/K-Valve;+ 2nd stage inlet fittings; J-regulators; Common in aluminium cylinder valve to yoke regulator
    • Similar as Scubapro part no :01.050.420
  • nbr90

    Scuba O-rings NBR 90Sh-015

    10.90

    Scuba O-rings NBR 90Sh-015

    • Qty : 50 O-rings 
    • ID X CS : 13,9 X 1,7 mm
    • Used for Tank Valve Bonnet Nut;1st stage inlet fittings; HP seal retainer seal; J valve module; Valve HP plugs; 2nd stage barrel and housing plug seals
    • Similar to Scubapro part no:01.050.427
  • nbr90

    Scuba O-rings NBR 90Sh-016

    17.90

    Scuba O-rings NBR 90Sh-016

    • Qty : 50 O-rings 
    • ID X CS : 15,5 X 1,7 mm
    • Used for Old 1/2″ NPS valves; 2nd stage inlet fittings; SAS LP seats; J-regulators; HP module seal; Valve HP plugs; 2nd stage barrel and housing plug seals; Paintball Guns; M18X1,5 Valves
  • nbr90

    Scuba O-rings NBR 90Sh-017

    9.90

    Scuba O-rings NBR 90Sh-017

    • Qty: 50 O-rings
    • ID X CS : 17,1 X 1,7 mm
    • Used for Regulator piston ring and cap; Dacor HP module
  • nbr90

    Scuba O-Rings NBR 90Sh-019

    9.95

    Scuba O-Rings NBR 90Sh-019

    • Qty : 50 O-rings 
    • ID X CS : 20,35 X 1,78 mm
    • Used for Healthway / USD / Sherwood industrial piston regulator
  • nbr90

    Scuba O-Rings NBR 90Sh-020

    12.50

    Scuba O-Rings NBR 90Sh-020

    • Qty: 50 O-rings 
    • ID X CS : 21,95 X 1,78 mm
    • Used for Regulator piston ring (USD & SAS)
  • nbr90

    Scuba O-Rings NBR 90Sh-022

    16.50

    Scuba O-Rings NBR 90Sh-022

    • Qty:  50 O -rings 
    • ID X CS : 25,12 X 1,78 mm
    • Used for Common regulator piston ring; Body plug seals; Paintball guns
  • nbr90

    Scuba O-Rings NBR 90Sh-023

    15.90

    Scuba O-Rings NBR 90Sh-023

    • Qty: 50 O-rings
    • ID X CS : 26,6 X 1,78 mm
    • Used for Regulator LP swivel seal; Body plug seals
  • nbr90

    Scuba O-Rings NBR 90Sh-024

    14.90

    Scuba O-Rings NBR 90Sh-024

    • Qty: 50 O-rings
    • ID X CS : 28,2 X 1,3 mm
    • Used for Piston cap seals (USD); SAS 1st stage
    • Similar to Apeks :AP1420
  • nbr90

    Scuba O-Rings NBR 90Sh-025

    10.50

    Scuba O-Rings NBR 90Sh-025

    • Qty : 50 O-rings
    • ID X CS : 29,8 X 1,5 mm
    • Used for Gauge lenses
    • Similar to Sherwood product no:5110-109

1 2 3