EPDM / Ethylene Propylene Diene Monomer Sh70 Standar Grade
EPDM has excellent resistance to heat, water and steam, alkali, mild acidic and oxygenated solvents, ozone, and sunlight (UV). EPDM compounds are not recommended for gasoline, petroleum oil and grease, and hydrocarbon environments.
Showing 1–15 of 36 results
-
Actual Size Scuba dive O-ring identification mat 115 o-ring sizes
39.99€ + vatScuba O-ring Identification bench mat-115 O-ring sizes (Working mat)
Rubber-neopen O-ring identification chart working mat. Contain all APEKS, Scubapro, Mares, Dive Rite, Cressi sub, Aqualung, Beuchat, JJ-CCR, and dive computer o-rings (Oceanic, Aqua, Suunto) as well as the most common o-rings used in scuba dive, like Tank neck, Tank valve, LP & HP Hose and BCD o-rings.A helpful tool for every scuba technician.
- Rubber pad 2mm thickness
- Size 35 x 65cm
-
EPDM O-Rings 70Sh-2.78 x 2.62
9.60€ + vatEPDM O-Rings 70Sh-2.78 x 2.62
- Qty : 50 O-rings
- Used for airguns and paintball guns
-
EPDM O-Rings for SCUBAPRO as part no: 01.050.317
13.99€ + vatScuba O-Rings EPDM 70Sh as Scubapro part no 01.050.317
- Qty: 50 O-rings
-
EPDM Scuba O’Rings Sh70-611
13.99€ + vatEPDM O-rings Sh70 -611
- Qty: 50 O-rings
- ID X CS : 8,74 X 1,78 mm 7/16″
- O-ring for HP Hose Male
- As Mares part no 46110108
- An intermediate size o-ring of 011 and 012.
-
EPDM Sh70 O-rings 019
14.99€ + vatEPDM O-rings-Sh70-019
- 50 O-rings
- ID X CS : 20,3 X 1,78 mm
- As Atomic part no: 20-2019-00
-
Male Hose end Scuba O-rings EPDM Sh70-011
12.95€ + vatScuba O-rings EPDM Sh70-011
- Qty: 50 O-rings
- ID X CS : 7,65 X 1,78 mm
- Used For Regulator hose: male end; Regulator port plugs LP; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets; Piston HP barrel BC hose coupler
- Similar to Sherwood part no:5121-104
- As Atomic part no: 20-2011-00
-
O-ring EPDM Sh 70 36×1.5
9.90€ + vatEPDM sh 70 O-Ring 36 x 1.5 mm
- Qty : 10 O-rings
- EPDM 36,0 x 1,50
-
O-ring EPDM Sh70-7.0 x 1.5 BC inner hose O-ring
13.90€ + vatBC inner hose O-ring EPDM sh70- 7mm x 1.5 mm
- Qty : 50 O-rings
- EPDM 7,0 x 1,50
- As Atomic part no: 20-7150-00
-
O-Ring Pick Metallic Tool- Ball End 1mm-1.2mm
15.99€ + vatMetallic O-ring pick Tool 2 sided Ball End 1mm/1.2mm (non-scratch tool)
-
O-rings for Ball valve BOV Shrimp EPDM 70Sh 24 X 2
15.80€ + vatO-rings for Ball valve BOV Shrimp EPDM 70Sh 24 X 2
- Qty: 50 O-rings
- ID X CS : 24 X 2 mm
- EPDM Sh70
- For ball valve of BOV shrimp
-
O-rings for MAV Swivel JJ-CCR 11.8 x 2.4
0.45€ + vatEPDM O-rings for MAV Swivel JJ-CCR 11.8 x 2.4
- Qty: 1 O-ring
-
O-Rings for Scuba diving EPDM 70Sh-020
18.50€ + vatScuba O-Rings EPDM 70Sh-020
- Qty: 50 O-rings
- ID X CS : 21,95 X 1,78 mm
- Used for Regulator piston ring (USD & SAS)
-
O-Rings for Suunto TanPOD Transmitters
16.99€ + vatO-Rings for Suunto Suunto TanPOD transmitters
**Bulk Discount up to 35% over 3,5,10,20,50 packs**
- Qty: 10 O-rings
- EPDM
- O-rings for SUUNTO TanPOD Transmitter
- IDx CS 25 x 2
-
O’rings service kit for Halcyon Flare
15.50€ + vatO-Ring service kit for Halcyon Flare
- Qty: 3 EPDM SH70 O-rings
- 1 glass seal O-ring of head unit
- 2 battery pack o-rings
