EPDM Scuba O-Rings Sh85
EPDM / Ethylene Propylene Diene Monomer Sh85 Extrusion resistant type
EPDM has excellent resistance to heat, water and steam, alkali, mild acidic and oxygenated solvents, ozone, and sunlight (UV). EPDM compounds are not recommended for gasoline, petroleum oil and grease, and hydrocarbon environments.
Showing all 13 results
- Add to cart
Actual Size Scuba O-ring Identification laminated poster-115 sizes
19.99€ + vatScuba O-ring Identification Poster-115 sizes(Laminated poster)
This High resolution laminated O-ring identification chart contains all Apeks, Scubapro, Mares, Dive Rite, Cressi Sub, Aqualung, Beuchat, JJ-CCR and dive computer o-rings (Oceanic, Aqualung, Suunto) as well as the most common o-rings used in scuba dive, as Tank neck, Tank valve, LP & HP Hose and BCD o-rings. Just place the poster on the workbench and you don’t have to look around for any o-ring identification.
- Actual o-ring size chart size 35 x 65 cm
- Select options
Dive O’rings EPDM 85Sh-014
11.99€ + vatDive O’rings EPDM 85Sh-014 (Hard)
- Qty : 50 O-rings
- ID X CS : 12,42 X 1,78 mm
- Used for Std Yoke Regulator/K-Valve;+ 2nd stage inlet fittings; J-regulators; Common in aluminium cylinder valve to yoke regulator
- Add to cart
EPDM O’Rings 85Sh-008
12.50€ + vatEPDM O-rings 85Sh-008(Hard)
- Qty : 50 O-rings
- ID X CS : 4,47 X 1,78 mm
- Used for Sonic regulators; Regulator piston ring; small HP sea
- Select options
EPDM O’Rings 85Sh-012
12.50€ + vatDive O’Rings EPDM 85Sh-012 (Hard)
- Qty : 50 O-rings
- ID X CS : 9,25 X 1,78 mm
- Select options
Hose O’rings EPDM 85Sh-011
13.20€ + vatHose O’rings EPDM 85Sh-011
- Qty : 50 O-rings
- EPDM 85Sh-011
- ID X CS : 7,65 X 1,78 mm
- Select options
O’Rings EPDM 85Sh-013
15.80€ + vatDive O-Rings EPDM 85Sh-013 (Hard)
- Qty : 50 O-rings
- ID X CS : 10,82 X 1,78 mm
- Select options
O’rings for Scubapro EPDM 85Sh-part.no: 01.050.145
10.50€ + vatO’rings for Scubapro EPDM 85Sh-part.no :01.050.145
- Qty : 50 O-rings
- Scubapro part no :01.050.145
- Select options
Scuba dive O-rings EPDM 85 Sh-111
11.99€ + vatEPDM 85 Sh-111
- Qty : 50 O-rings
- ID X CS : 10,77 X 2,62 mm
- Sherwood part no: 6400-138
- As MARES part no :46110247
- Select options
Scuba Dive O-rings EPDM 85Sh-003 for SPG Swivels
10.00€ + vatDive O-rings EPDM 85Sh- 003 (Hard)
- Qty : 50 O-rings
- ID X CS : 1,42 X 1,52 mm
- Used for Submersible pressure gauge/consoles: internal swivel seal
- Select options
Scuba Dive O-rings EPDM 85Sh-006
12.75€ + vatDive O-rings EPDM 85Sh-006(Hard)
- Qty : 50
- ID X CS : 2,8 X 1,7 mm
- Used for Common seal in regulator balance chambers; Power inflator stems; CO2 detonators; SAS gland seal
- As Scubapro Part No 06.202.050
- Select options
Scuba Dive O’Rings EPDM 85Sh-010
11.90€ + vatDive O’Rings EPDM 85Sh- 010(Hard)
- ID X CS : 6,07 X 1,78 mm
- Qty:50 O-rings
- Select options
Scuba Dive O’Rings EPDM 85Sh-015
12.40€ + vatDive O’Rings EPDM 85Sh-015(Hard)
- Qty : 50 O-rings
- ID X CS : 13,9 X 1,7 mm
- Used for Tank Valve Bonnet Nut;1st stage inlet fittings; HP seal retainer seal; J valve module; Valve HP plugs; 2nd stage barrel and housing plug seals
- Select options
Scuba O’rings EPDM 85Sh-022
14.90€ + vatScuba O-rings EPDM 85Sh-022(Hard)
- Qty : 50 O-rings
- ID X CS : 25,12 X 1,78 mm
