Showing all 8 results
-
Tool for Environmental cap opening of Cressi Sub models MC7, MC9.
24.99€ + vatScuba tool for Environmental cap opening of Cressi Sub first stages (MC7, MC9).
-
HP Seat for Scubapro Beuchat and Cressi Sub 1st stage
4.25€ + vatH.P Piston Seat for Scuba Gear 1st stages.
- As Scubapro part no 10.102.103
- As Cressi Sub part no HZ730155
- As Beuchat part no 7906
-
Service kit for Cressi XS2-2nd stage
9.99€ + vatService kit for Cressi Sub 2nd stage XS2
- For air use Only
- Content :
- O-rings as codes : 2 x HZ730218, HZ790091, HZ790092, HZ730221,HZ 770099
- LP Seat as HZ742013,
- Demand Level Nut as : HZ746094
- Stainless steel Washer as: HZ746094
- Metal Clip as: HZ770099
-
LP-Seat for Mares & Cressi sub 2nd Stage *New*
3.75€ + vatLP-Seat for Mares -Cressi sub 2nd Stage *New*
- Dimesnsions: ⌀ 7mm x 2 mm thickness
- Seat for 2ns stage regulators of Cressi as part no HZ742013
- Seat for Mares 2nd stages as part no: 46184062
-
Actual Size Scuba dive O-ring identification mat 115 o-ring sizes
39.99€ + vatScuba O-ring Identification bench mat-115 O-ring sizes (Working mat)
Rubber-neopen O-ring identification chart working mat. Contain all APEKS, Scubapro, Mares, Dive Rite, Cressi sub, Aqualung, Beuchat, JJ-CCR, and dive computer o-rings (Oceanic, Aqua, Suunto) as well as the most common o-rings used in scuba dive, like Tank neck, Tank valve, LP & HP Hose and BCD o-rings.A helpful tool for every scuba technician.
- Rubber pad 2mm thickness
- Size 35 x 65cm
-
Scuba Tool for 2nd Stage Poppet Installation **Updated**
11.99€ + vatTool for 2nd Stage Poppet Installation
** updated**
Universal tool: Apeks, Aqualung, Scubapro, Cressi, Sherwood, and more
With fingers grooves for better grip
-
Scuba Dive O-rings NBR Sh70-025
11.99€ + vatScuba Dive O-rings NBR Sh70-025
- Qty in box: 50 O-rings
- NBR Sh70-025
- ID X CS : 29,87 X 1,78 mm
- Used for Gauge lenses
- Used for CRESSI: Archimede 2
- Used for DIVE RITE: Nitek
- Used for IST: PG3000
-
Bullet for installing O-ring on piston 1st stage
9.99€ + vatUniversal bullet for installing O-ring on the piston 1st stage
This bullet will fit most common models of piston first stages. like Scubapro MK2 – Aqua Calypso – Mares R2s – Sherwood Brut – Cressi AC2
