Shop

Showing 196–205 of 205 results

  • Tribolube® 66-2 Oz Tube

    39.00

    Tribolube-66 is intended for use in mild to high pressure systems where nonreactive with LOX and GOX is required, strong acids, oxidizers, fuels, and solvents is required. Is qualified to MIL-PRF-27617, Type 1. Although this lubricant is very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the greases under certain conditions.Tribolube-66

  • Tribolube® 66-5gr Tube

    19.00

    Tribolube-66 is intended for use in mild to high pressure systems where nonreactive with LOX and GOX is required, strong acids, oxidizers, fuels, and solvents is required. Is qualified to MIL-PRF-27617, Type 1. Although this lubricant is very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the greases under certain conditions.Tribolube-66

  • Tribolube® 71-1Oz Jar

    50.00

    Tribolube® 71 is designed for open and closed circuit diving systems.

  • Tribolube® 71-5gr Tube

    20.00

    Tribolube® 71 is designed for open and closed circuit diving systems.

  • Universal bullit for installing O-ring on piston

    19.00
    This bullet will fit most common models of piston first stages. Below some examples:
    - Scubapro MK2
    - Aqualung Calypso
    - Mares R2s
    - Sherwood Brut
    - Cressi AC2
    
  • Universal HP swivel O-ring installation assist tool

    18.00
    The HP swivel is a tiny part and most of the time it is difficult to put O-rings on the small HP swivel.By using this tools the work gets done in a matter of seconds.
    
  • viton

    VITON GREEN Sh 70-213 for 100% Oxygen

    33.00
    • Viton Green Sh 70-213
    • 10 O-rings
    • ID X CS :23.39  X 3.53 mm
  • viton

    VITON® Green Sh70-003

    8.45
    • Viton®-Sh70-003
    • 10 O-rings
    • ID X CS : 1,42 X 1,52 mm
    • Used for LP Hose ;Submersible pressure gauge/consoles: internal swivel seal
    • Scubapro part number 01.050.110
  • viton

    VITON® Green Sh70-012

    12.00
    • Viton-Sh70-012
    • Quantity : 10 O-rings
    • ID X CS : 9.25 X 1.78 mm
    • Used for Console/gauge hoses: male end; Underneath filter; Hose adapters; HP seat seal; LP swivel cap; HP port plugs.
  • viton

    VITON®Green Sh90-008

    • Viton Green Sh 90-008 (coming soon)
    • ID X CS : 4,4 X 1,7 mm
    • Used for Sonic regulators; Regulator piston ring; small HP seal
    • Qty : 50 O-rings
1 2 3 11 12 13 14