Shop

Showing 151–165 of 167 results

  • POLY Sh 90- 009

    4.50
    • Quantity: 10 O-rings
    • POLY 90-009
    • ID X CS : 5,2 X 1,7 mm
    • Sherwood part no: 6400-113
  • POLY Sh 90- 111

    5.75
    • Quantity: 10 O-rings
    • POLY Sh 90-111
    • ID X CS : 10,7 X 2,6 mm
    • Subapro part no :1.050.428
  • Scubapro DIN retaining knob O-ring installation bullet

    17.00
    DIN retaining knobs have big and sharp threats and putting an O-ring over these threats most of the time damages the O-ring.By using this small bullet the job is done quick while  O-ring is still in perfect condition.
  • Scubapro MK2 Plus O-ring Service kit

    18.00

    O-Ring Service kit for MK2 Plus.

    1 X 008 EPDM-NBR Sh 70- Scubapro part no: 01-050-126

    1 x 010 EPDM or NBR Sh 70- Scubapro part no: 01-050-132

    1 x 011 NBR Sh 90 -Scubapro part no: 01-050-138

    2 x 015 NBR Sh 70-Scubapro part no: 01-050-158

    1 x 022 EPDM  Sh 70-Scubapro part no: 01-050-177

    1 x 111 Poly Sh 90 -Scubapro part no :01-050-428

    1 x Teflon seat Scubapro part no :01-102-103

  • Scubapro MK2 Plus Teflon seat

    5.00

    1 x Teflon seat Scubapro part no :01-102-103

  • Scubapro MK20, MK21, MK25 bushing tool

    25.00
    Some Scubapro first stages use a bushing arrangement to help the movement of the piston during diving.Installing these bushing rings and the small O-ringin-between them is made easy when you use this bushing tool.
  • Tribolube® 2080-2Oz Jar

    14.00

    Silicone grease compounds Not for use in OXYGEN SERVICE.
    Used widely in the SCUBA industry in non-oxygen applications
    Some consumers are switching to these greases to replace the silicones they are currently using.

  • Tribolube® 2080H-2Oz Tube

    14.00

    Silicone grease compounds Not for use in OXYGEN SERVICE.
    Used widely in the SCUBA industry in non-oxygen applications
    Some consumers are switching to these greases to replace the silicones they are currently using.

  • Tribolube® 2080L-1/4Oz Jar

    7.50

    Silicone grease compounds not for use in OXYGEN SERVICE.
    Used widely in the SCUBA industry in non-oxygen applications
    Some consumers are switching to these greases to replace the silicones they are currently using.

  • Tribolube® 2080L-2Oz Tube

    15.00

    Silicone grease compounds not for use in OXYGEN SERVICE.
    Used widely in the SCUBA industry in non-oxygen applications
    Some consumers are switching to these greases to replace the silicones they are currently using.

  • Tribolube® 66-2 Oz Tube

    39.00

    Tribolube-66 is intended for use in mild to high pressure systems where nonreactive with LOX and GOX is required, strong acids, oxidizers, fuels, and solvents is required. Is qualified to MIL-PRF-27617, Type 1. Although this lubricant is very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the greases under certain conditions.Tribolube-66

  • Tribolube® 66-5gr Tube

    19.00

    Tribolube-66 is intended for use in mild to high pressure systems where nonreactive with LOX and GOX is required, strong acids, oxidizers, fuels, and solvents is required. Is qualified to MIL-PRF-27617, Type 1. Although this lubricant is very inert, newly exposed rubbing surfaces of aluminum and magnesium may react with the greases under certain conditions.Tribolube-66

  • Tribolube® 71-1Oz Jar

    50.00

    Tribolube® 71 is designed for open and closed circuit diving systems.

  • Tribolube® 71-5gr Tube

    20.00

    Tribolube® 71 is designed for open and closed circuit diving systems.

  • Universal bullit for installing O-ring on piston

    19.00
    This bullet will fit most common models of piston first stages. Below some examples:
    - Scubapro MK2
    - Aqualung Calypso
    - Mares R2s
    - Sherwood Brut
    - Cressi AC2
    
1 2 3 8 9 10 11 12