VITON O-Rings for Nitrox

Only For Nitrox & Air Diving mixtures

NOT for 100% Oxygen gas.

For 100% Oxygen gas use only our Viton Green FKM products

For orders over 2 pack per size -15%OFF

For orders over 4 pack per size -20%OFF

For orders over 9 pack per size -25%OFF

Showing 1–15 of 23 results

  • viton

    GENUINE FKM VITON O-RINGS 112 Black

    19.90
    • Black FKM90-112
    • ID X CS : 12,3 X 2,6 mm
    • Used for Steel tank valve; Basal DIN seal, nitrox diving
    • Similar to Scubapro 01.050.405
    • Qty: 50 O-rings

     

  • GENUINE VITON O-Ring Service box for Nitrox

    50.00
    • FKM Sh 75-90 Service box.
    • 003,007,009,010,011,012,013
    • 014,015,111,112,214
    • O-ring pick tool included
    • Qty:120 O-rings
  • viton

    GENUINE VITON O-RINGS 003

    9.45
    • FKM75-003
    • ID X CS : 1,4 X 1,5 mm
    • Used for LP Hose ;Submersible pressure gauge/consoles: internal swivel seal
    • Same size as Scubapro part no :01-050-110
    • Qty: 50 O-rings
  • viton

    GENUINE VITON O-RINGS 006

    12.90
    • FKM90-006
    • ID X CS : 2,90 X 1,7 mm
    • Used for Common seal in regulator balance chambers; Power inflator stems; CO2 detonators; SAS gland seal, Apeks HP seat (1st stage)
    • Qty : 50 O-rings
  • viton

    GENUINE VITON O-RINGS 007

    15.90
    • FKM75 -007
    • ID X CS : 3,6 X 1,7 mm
    • Used for Regulator piston ring; small HP seal
    • Qty : 50 O-rings
  • viton

    GENUINE VITON O-RINGS 008

    12.00
    • FKM75-008
    • ID X CS : 4,4 X 1,7 mm
    • Used for Sonic regulators; Regulator piston ring; small HP seal
    • Qty : 50 O-rings
  • viton

    GENUINE VITON O-RINGS 009

    13.50
    • FKM75-009
    • ID X CS : 1,4 X 1,5 mm
    • Used for Seal in open-tube depth gauges
    • Qty : 50 O-rings
  • viton

    GENUINE VITON O-RINGS 010

    10.70
    • FKM75 -010
    • ID X CS : 6,07 X 1,78 mm
    • Used for Regulator hose: swivel end; Piston barrel HP seal; 2nd stage orifIce seal; Valve stem seals; Early calupso Regulators; Power inflators stems;
    • Qty : 50 O-rings
  • viton

    GENUINE VITON O-RINGS 011

    11.60
    • FKM75 -011
    • ID X CS : 7,6 X 1,7 mm
    • Used for Regulator hose: male end; Regulator port plugs LP; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets; Piston HP barrel BC hose coupler.
    • Qty : 50 O-rings
  • viton

    GENUINE VITON O-RINGS 012

    17.25
    • Quantity : 50 O-rings
    • FKM75-012
    • D X CS : 9,2 X 1,7 mm
    • Used for Console/gauge hoses: male end; Underneath filter; Hose adapters; HP seat seal; LP swivel cap; HP port plugs.
  • viton

    GENUINE VITON O-RINGS 013

    16.50
    • Quantity : 50 O-rings
    • FKM75-013
    • ID X CS : 10,8 X 1,7 mm
    • Used for Piston seat seal; Survivair manifolds; Power inflator seals; Common in aluminium cylinder valve to yoke regulator seals.
  • viton

    GENUINE VITON O-RINGS 014

    15.45
    • Quantity : 50 O-rings
    • FKM75-014
    • ID X CS : 12,4 X 1,7 mm
    • Used for Std. Yoke Regulator/K-Valve;+ 2nd stage inlet fittings; J-regulators; Common in aluminum cylinder valve to yoke regulator.
  • viton

    GENUINE VITON O-RINGS 015

    18.50
    • FKM90-015
    • ID X CS : 13,9 X 1,7 mm
    • Used for 1st stage inlet fittings; HP seal retainer seal; J valve module; Valve HP plugs; 2nd stage barrel and housing plug seals
    • Scubapro part no 01-050-396
    • Qty : 50 O-rings
  • viton

    GENUINE VITON O-RINGS 016

    16.90
    • FKM75-016
    • ID X CS : 15,5 X 1,7 mm
    • Used for Old 1/2″ NPS valves; 2nd stage inlet fittings; SAS LP seats; J-regulators; HP module seal; Valve HP plugs; 2nd stage barrel and housing plug seals; Paintball Guns; M18X1,5 Valves
    • Qty : 50 O-rings
  • viton

    GENUINE VITON O-RINGS 017

    19.90
    • FKM Sh75-017
    • ID X CS : 17,2 X 1,78 mm
    • Used for Regulator piston ring and cap; Dacor HP module
    • Scubapro part no 01-050-395
    • Qty : 50 O-rings
1 2