Soft O-Rings NBR Sh70

For Low Pressure applications (up to 100 bar)

Showing 1–15 of 58 results

  • nbr70

    NBR 70 SOFT 2.20 X 1.00

    8.50
    • Quantity: 50 O-rings
    • NBR 70- 2.20 X 1.00
    • ID X CS : 2,20 X 1,00 mm
    • Scubapro 01.050.363 
  • nbr70

    NBR 70 SOFT 2.5mm x 1.00mm

    8.90
    • Quantity: 50 O-rings
    • NBR 70-2.5 x 1.00
    • ID X CS : 2,50 X 1,00 mm
    • Similar to SCUBAPRO part no: 1,050,363
  • nbr70

    NBR 70 O-Rings 1.70 x 1.00 APEKS

    3.95
    • Quantity: 10 O-rings
    • NBR 70
    • ID X CS : 1,70  X 1,00 mm
    • Used for APEKS regulators
  • nbr70

    NBR 70 O-Rings 15.60 x 2.62

    8.50
    • Quantity: 50 O-rings
    • NBR Sh70
    • ID X CS : 15,60  X 2,62 mm
  • nbr70

    NBR 70 O-Rings SOFT 002

    6.90
    • Number pieces in box: 100
    • NBR AS568-002
    • ID X CS : 1,1 X 1,2 mm
  • nbr70

    NBR 70 O-Rings SOFT 003

    5.40
    • Quantity : 50 O-rings
    • NBR 70-003
    • ID X CS : 1,4 X 1,5 mm
    • Used for Submersible pressure gauge/consoles: internal swivel seal
  • nbr70

    NBR 70 O-Rings SOFT 004

    9.90
    • Quantity: 50 O-rings
    • NBR 70-004
    • 1,78 mm X 1,78mm
    • Used for Older internal swivel seal models; AT-PAC BC’s Power inflator control
    • Sherwood part no: 6121-122
  • nbr70

    NBR 70 O-Rings SOFT 005

    9.90
    • Quantity: 50 O-rings
    • NBR 70-005
    • ID X CS : 2,57 X 1,78 mm
    • Seal used in older depth and tank “stem” gauges
  • nbr70

    NBR 70 O-Rings SOFT 006

    5.90
    • Quantity: 50 O-rings
    • NBR 70-006
    • ID X CS : 2,8 X 1,7 mm
    • Used for Common seal in regulator balance chambers; Power inflator stems; CO2 detonators; SAS gland seal
    • Sherwood part no: 6500-118, 5121-101
    • Mares part no: 46110101
  • nbr70

    NBR 70 O-Rings SOFT 007

    7.90
    • Quantity: 50 O-rings
    • NBR 70-007
    • ID X CS : 3,6 X 1,7 mm
    • Used for Regulator piston ring; small HP seal
    • Sherwood Part no :G007A
    • Scubapro part no: 01-050-120
  • nbr70

    NBR 70 O-Rings SOFT 008

    6.90
    • Quantity: 50 O-rings
    • NBR70-008
    • ID X CS : 4,4 X 1,7 mm
    • Used for Sonic regulators; Regulator piston ring; small HP sea
    • Sherwood part no:6110-129
  • nbr70

    NBR 70 O-Rings SOFT 009

    8.90
    • Quantity: 50 O-rings
    • NBR 70-009
    • ID X CS : 5,2 X 1,7 mm
    • Used for Seal in open-tube depth gauges
    • Sherwood part no : 6121-135
  • nbr70

    NBR 70 O-Rings SOFT 010

    6.90
    • Quantity : 50 O-rings
    • NBR 70-010
    • ID X CS : 6,0 X 1,7 mm
    • Used for Regulator hose: swivel end; Piston barrel HP seal; 2nd stage orifice seal; Valve stem seals; Early calypso Regulators; Power inflators stems;
    • Sherwood parts no: 5121-103,6110-119,6161-101,6121-137
  • nbr70

    NBR 70 O-Rings SOFT 011

    6.90
    • Quantity: 50 O-rings
    • NBR 70-011
    • ID X CS : 7,6 X 1,7 mm
    • Used For Regulator hose: male end; Regulator port plugs LP; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets; Piston HP barrel BC hose coupler
    • Apeks Id:1409
    • Sherwood part no:5121 104
    • Mares part no:46110107
  • nbr70

    NBR 70 O-Rings SOFT 012

    7.90
    • Quantity: 50 O-rings
    • NBR70 -012
    • ID X CS : 9,2 X 1,7 mm
    • Used For Console/gauge hoses: male end; Underneath filter; Hose adapters; HP seat seal; LP swivel cap; HP port plugs
    • Mares part no: 46110108
1 2 3 4