Nitrile (NBR)

Showing 61–75 of 96 results

  • nbr90

    NBR 90 O-Rings HARD 006

    10.90
    • Quantity : 100
    • NBR 90-006
    • ID X CS : 2,8 X 1,7 mm
    • Used for Common seal in regulator balance chambers; Power inflator stems; CO2 detonators; SAS gland seal
    • Apeks Id:
    • Scubapro code: 1.050.117
  • nbr90

    NBR 90 O-Rings HARD 007

    10.90
    • Number pieces in box: 100
    • NBR 90-007
    • ID X CS : 3,6 X 1,7 mm
    • Used for Regulator piston ring; small HP seal
  • nbr90

    NBR 90 O-Rings HARD 008

    12.90
    • Quantity : 100 O-rings
    • NBR 90-008
    • ID X CS : 4,4 X 1,7 mm
    • Used for Sonic regulators; Regulator piston ring; small HP sea
    • Scubapro par no 01-050-126
  • nbr90

    NBR 90 O-Rings HARD 009

    10.90
    • Quantity: 100 O-rings
    • NBR 90-009
    • ID X CS : 5,2 X 1,7 mm
    • Used for Seal in open-tube depth gauges
  • nbr90

    NBR 90 O-Rings HARD 010

    10.90
    • Quantity : 100 O-rings 
    • NBR 90-010
    • ID X CS : 6,0 X 1,7 mm
    • Used for Regulator hose: swivel end; Piston barrel HP seal; 2nd stage orifice seal; Valve stem seals; Early calypso Regulators; Power inflators stems
    • Scubabpro part no:1.050.136
  • nbr90

    NBR 90 O-Rings HARD 011

    12.90
    • Quantity : 100 O-rings 
    • NBR 90-011
    • ID X CS : 7,6 X 1,7 mm
    • Used for standard 3/8″ LP Port;Regulator hose: male end; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets; Piston HP barrel BC hose coupler
    • Scubapro Part no:1.050.138
  • nbr90

    NBR 90 O-Rings HARD 012

    10.65
    • Quantity : 100 O-rings 
    • NBR 90-012
    • ID X CS : 9,2 X 1,7 mm
    • Used for 7/16″ HP Port/Hose Manifold/Console/gauge hoses: male end; Underneath filter; Hose adapters; HP seat seal; LP swivel cap; HP port plugs & SuuntoWireless transmitter to 1st stage interface
    • Apeks Id:1445
    • Scubapro part no:1.050.145
  • nbr90

    NBR 90 O-Rings HARD 013

    13.90
    • Quantity : 100 O-rings 
    • NBR 90-013
    • ID X CS : 10,8 X 1,7 mm
    • Used for 1/2 LP Large Port;Piston seat seal; Survivair manifolds; Power inflator seals; Common in aluminium cylinder valve to yoke regulator seals
    • Scubapro part no:1.050.147
  • nbr90

    NBR 90 O-Rings HARD 014

    12.90
    • Quantity : 100 O-rings
    • NBR 90-014
    • ID X CS : 12,4 X 1,7 mm
    • Used for Std Yoke Regulator/K-Valve;+ 2nd stage inlet fittings; J-regulators; Common in aluminium cylinder valve to yoke regulator
    • Apeks Id:1459
    • Scubapro  01-050-347
  • nbr90

    NBR 90 O-Rings HARD 015

    10.90
    • Quantity : 100 O-rings 
    • NBR 90-015
    • ID X CS : 13,9 X 1,7 mm
    • Used for Tank Valve Bonnet Nut;1st stage inlet fittings; HP seal retainer seal; J valve module; Valve HP plugs; 2nd stage barrel and housing plug seals
    • Scubapro part no:1.050.158
  • nbr90

    NBR 90 O-Rings HARD 016

    17.90
    • Quantity : 100 O-rings 
    • NBR 90-016
    • ID X CS : 15,5 X 1,7 mm
    • Used for Old 1/2″ NPS valves; 2nd stage inlet fittings; SAS LP seats; J-regulators; HP module seal; Valve HP plugs; 2nd stage barrel and housing plug seals; Paintball Guns; M18X1,5 Valves
  • nbr90

    NBR 90 O-Rings HARD 017

    13.90
    • Number pieces in box: 100
    • NBR90-017
    • ID X CS : 17,1 X 1,7 mm
    • Used for Regulator piston ring and cap; Dacor HP module
  • nbr90

    NBR 90 O-Rings HARD 018

    15.50
    • Number pieces in box: 100
    • NBR 90-018
    • ID X CS : 18,7 X 1,7 mm
    • Used for Regulator piston ring (1970’s); 2nd stage inlet seal; Body plug seal
  • nbr90

    NBR 90 O-Rings HARD 019

    18.50
    • Quantity : 100 O-rings 
    • NBR 90-019
    • ID X CS : 20,35 X 1,78 mm
    • Used for Healthway / USD / Sherwood industrial piston regulator
  • nbr90

    NBR 90 O-Rings HARD 020

    12.50
    • Quantity: 100 O-rings 
    • NBR90-020
    • ID X CS : 21,95 X 1,78 mm
    • Used for Regulator piston ring (USD & SAS)
1 2 3 4 5 6 7