Nitrile (NBR)

Showing 46–60 of 98 results

  • nbr70

    NBR 70 O-Rings SOFT 9.75 x 1.78 (012-013)

    8.50
    • Qty: 50 O-rings
    • ID X CS : 9,75  X 1,78 mm
  • nbr70

    NBR 70 O-Rings SOFT 902

    7.80
    • Qty: 50 O-rings
    • ID X CS : 6,02 X 1,63 mm
    • SCUBAPRO part no: 1.050.293
  • nbr70

    NBR 70 O-Rings SOFT 903

    9.10
    • Qty: 50 O-rings
    • ID X CS : 7,65 X 1,63 mm
    • Sherwood part no: 6110-123 &6121-141
  • nbr70

    NBR 70 O-Rings SOFT 905

    10.00
    • Qty: 50 O-rings
    • ID X CS : 10,72 X 1,83 mm
    • Sherwood part no: 6400-135
  • nbr70

    NBR 70 O-Rings SOFT 906

    9.80
    • Qty: 50 O-rings
    • ID X CS : 11,9 X 1,98 mm
    • Sherwood part no: 6110-115 & 6121-104
  • nbr70

    NBR 70 SOFT 1,95 X 1,00

    10.50
    • Qty: 50 O-rings
    • Sherwood part no: 6500-112
  • nbr70

    NBR 70-RO-2,40 X 1,90 mm

    9.60
    • Qty: 50 O-rings
    • ID X CS : 2,40 X 1,90 mm
    • SCUBAPRO part no: 1.050.317
  • nbr70

    NBR 70Sh O-Rings 016

    8.90
    • Qty : 50 O-rings
    • ID X CS : 15,6 X 1,78
    • Used for Old 1/2″ NPS valves; 2nd stage inlet fittings; SAS LP seats; J-regulators; HP module seal; Valve HP plugs; 2nd stage barrel and housing plug seals; Paintball Guns; M18X1,5 Valves
    • Sherwood part no : 6400-125, 6500-129
    • Scubapro part no: 1.050.160
    • Battery cap of Perdix AI transmitter 
  • nbr90

    NBR 90 O-Rings HARD 001

    4.90
    • Qty : 50 O-rings
    • ID X CS : 0,7 X 1,0 mm
  • nbr90

    NBR 90 O-Rings HARD 002

    7.90
    • Qty :50 O-rings 
    • ID X CS : 1,1 X 1,2 mm
  • nbr90

    NBR 90 O-Rings HARD 003

    5.40
    • Qty : 50 O-rings
    • ID X CS : 1,4 X 1,5 mm
    • Used for Submersible pressure gauge/consoles: internal swivel seal
    • Similar to Scubapro part 01.050.108
  • nbr90

    NBR 90 O-Rings HARD 004

    9.90
    • Qty: 50
    • ID X CS : 1,78 X 1,78 mm
    • Used for Older internal swivel seal models; AT-PAC BC’s Power inflator control
  • nbr90

    NBR 90 O-Rings HARD 005

    9.90
    • Qty: 50 O-rings 
    • ID X CS : 2,5 X 1,78 mm
    • Used for Seal used in older depth and tank “stem” gauges
  • nbr90

    NBR 90 O-Rings HARD 006

    7.90
    • Qty : 50 O-rings 
    • ID X CS : 2,8 X 1,7 mm
    • Used for Common seal in regulator balance chambers; Power inflator stems; CO2 detonators; SAS gland seal
    • Similar to Scubapro part no: 01.050.421
  • nbr90

    NBR 90 O-Rings HARD 007

    7.90
    • Qty: 50 O-rings 
    • ID X CS : 3,6 X 1,7 mm
    • Used for Regulator piston ring; small HP seal
1 2 3 4 5 6 7