VITON® Scuba O-rings For Nitrox

Showing 16–30 of 47 results

  • viton

    Genuine Black Viton®75Sh- 022

    17.90
    • ID X CS : 25,1 X 1,7 mm
    • Used for Common regulator piston ring; Body plug seals; Paintball guns
    • Scubapro part no 01.050.407
    • Qty : 50 O-rings
  • viton

    Genuine Black Viton®75Sh-007

    15.90
    • ID X CS : 3,6 X 1,7 mm
    • Used for Regulator piston ring; small HP seal
    • Similar to Scubapro part no :01.050.120
    • Qty : 50 O-rings
  • viton

    Genuine Black Viton®75Sh-016

    16.90
    • ID X CS : 15,5 X 1,7 mm
    • Used for Old 1/2″ NPS valves; 2nd stage inlet fittings; SAS LP seats; J-regulators; HP module seal; Valve HP plugs; 2nd stage barrel and housing plug seals; Paintball Guns; M18X1,5 Valves
    • Qty : 50 O-rings
  • viton

    Genuine Black Viton®90Sh-015

    18.50
    • ID X CS : 13,9 X 1,7 mm
    • Used for 1st stage inlet fittings; HP seal retainer seal; J valve module; Valve HP plugs; 2nd stage barrel and housing plug seals
    • Scubapro part no 01.050.396
    • Qty : 50 O-rings
  • viton

    Genuine Black Viton®Sh90- 111

    26.50
    • Qty: 100 O-rings
    • ID X CS : 10,7 X 2,6 mm
    • Used for Australian/ Nemrod valves; BC inflators; DIN regulator seals
    • Scubapro no 01.050.195
  • viton

    Genuine Black Viton®Sh90-112

    19.90
    • ID X CS : 12,3 X 2,6 mm
    • Used for Steel tank valve; Basal DIN seal, nitrox diving
    • Similar to Scubapro 01.050.405
    • Qty: 50 O-rings

  • viton

    Genuine Green VITON® Sh90-214

    • VITON®-Sh90-214 (coming soon)
    • Qty: 10 O-rings
    • ID X CS : 24,9 X 3,5 mm
    • Used for Cylinder to 3/4 valve seal; Cylinder to M25X2 valve Seals
    •  Scubapro part no 01.050.261
  • viton

    Genuine VITON® Green 70Sh-112

    17.00
    • VITON-70Sh-112
    • 10 O-rings
    • ID X CS : 12,3 X 2,6 mm
    • Used for Steel tank valve; Basal DIN seal
  • viton

    Genuine VITON® Green Sh90-003

    • Viton®-Sh90-003 (coming soon)
    • 10 O-rings
    • ID X CS : 1,42 X 1,52 mm
    • Used for LP Hose ;Submersible pressure gauge/consoles: internal swivel seal
  • viton

    Genuine VITON® Green Sh90-006

    • VITON® Green Sh90-006 (coming soon)
    • ID X CS : 2,90 X 1,7 mm
    • Used for Common seal in regulator balance chambers; Power inflator stems; CO2 detonators; SAS gland seal, Apeks HP seat (1st stage)
    • Qty : 50 O-rings
  • viton

    Genuine VITON® Green Sh90-012

    • Green Viton®-Sh90-012 (coming soon)
    • Qty : 10 O-rings
    • ID X CS : 9.2 X 1.78 mm
    • Used for Console/gauge hoses: male end; Underneath filter; Hose adapters; HP seat seal; LP swivel cap; HP port plugs.
    • Scubapro part no :01.050.403
    • High pressure o-ring for Perdix wireless transmitter 
  • viton

    Genuine VITON® Green Sh90-112

    • VITON®-Sh90-112 (coming soon)
    • 10 O-rings
    • ID X CS : 12,3 X 2,6 mm
    • Used for Steel tank valve; Basal DIN seal
    • Scubapro part no :01.050.405
  • viton

    Genuine VITON®Green 90Sh-111

    • Green Viton®-Sh90-111 (coming soon)
    • 10 O-rings
    • ID X CS : 10,77 X 2,62 mm
    • Used for Australian/ Nemrod valves; BC inflators; DIN regulator seals
    • Scubapro part no 01.050.195
  • viton

    Genuine VITON®Green Sh90-116

    • Green Viton® Sh90-116
    • Qty: 10 O-rings
    • I D X CS : 18,72 X 2,62 mm
    • Used for 1/2 Tank neck(Small) Genesis tank valve; BCD Inflator Mechanisms; Paintball Guns
  • viton

    Green VITON® -Sh70-010

    16.00
    • Green Viton® Sh70-010
    • Qty: 10 O-rings
    • ID X CS : 6,07 X 1,78 mm
    • Used for Regulator hose: swivel end; Piston barrel HP seal; 2nd stage orifIce seal; Valve stem seals; Early calypso Regulators; Power inflators stems;
1 2 3 4