VITON® Scuba O-rings For Nitrox

For orders over 3 pack per size -15%OFF

For orders over 5 pack per size -20%OFF

For orders over 10 pack per size -25%OFF

Showing 1–15 of 47 results

  • viton

    Genuine Black Viton® 75 Sh-009

    13.50
    • ID X CS : 1,4 X 1,5 mm
    • Used for Seal in open-tube depth gauges
    • Qty : 50 O-rings
  • viton

    Genuine Black Viton® 75Sh-008

    12.00
    • ID X CS : 4,4 X 1,7 mm
    • Used for Sonic regulators; Regulator piston ring; small HP seal
    • Qty : 50 O-rings
  • viton

    Genuine Black Viton® 75Sh-011

    11.60
    • ID X CS : 7,6 X 1,7 mm
    • Used for Regulator hose: male end; Regulator port plugs LP; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets; Piston HP barrel BC hose coupler.
    • Same size as Scubapro Part no:1.050.143
    • Qty : 50 O-rings
  • viton

    Genuine Black Viton® 75Sh-020

    16.90
    • ID X CS : 21,9 X 1,7 mm
    • Used for Regulator piston ring (USD & SAS)
    • Qty : 50 O-rings
  • viton

    Genuine Black Viton® 75Sh-021

    17.90
    • ID X CS : 23,5 X 1,7 mm
    • Used for Regulator piston ring
    • Qty : 50 O-rings
  • viton

    Genuine Black Viton® 75Sh-214

    46.00
    • Qty: 100 O-rings
    • ID X CS : 24,9 X 3,5 mm
    • Used for Cylinder to 3/4 valve seal; Cylinder to M25X2 valve Seals
    • Same size as Scubapro part no 01.050.261
  • Genuine Black Viton® O-Rings Service box for Nitrox

    50.00
    • Black Viton® Sh 75-90 Service box.
    • 003,007,009,010,011,012,013
    • 014,015,111,112,214
    • O-ring pick tool included
    • Qty:120 O-rings
  • viton

    Genuine Black Viton® Sh75-003

    9.45
    • ID X CS : 1,4 X 1,5 mm
    • Used for LP Hose ;Submersible pressure gauge/consoles: internal swivel seal
    • Scubapro part no :01.050.110
    • Qty: 50 O-rings
  • viton

    Genuine Black Viton® Sh75-012

    17.25
    • ID X CS : 9,2 X 1,7 mm
    • Used for Console/gauge hoses: male end; Underneath filter; Hose adapters; HP seat seal; LP swivel cap; HP port plugs.
    • Qty : 50 O-rings
  • viton

    Genuine Black Viton® Sh90-006

    12.90
    • ID X CS : 2,90 X 1,7 mm
    • Used for Common seal in regulator balance chambers; Power inflator stems; CO2 detonators; SAS gland seal, Apeks HP seat (1st stage)
    • Qty : 50 O-rings
  • viton

    Genuine Black Viton®75 Sh- 010

    10.70
    • ID X CS : 6,07 X 1,78 mm
    • Used for Regulator hose: swivel end; Piston barrel HP seal; 2nd stage orifIce seal; Valve stem seals; Early calupso Regulators; Power inflators stems;
    • Similar to Scubapro part no 01.050.394
    • Qty : 50 O-rings
  • viton

    Genuine Black Viton®75 Sh-013

    16.50
    • ID X CS : 10,8 X 1,7 mm
    • Used for Piston seat seal; Survivair manifolds; Power inflator seals; Common in aluminium cylinder valve to yoke regulator seals.
    • Qty : 50 O-rings
  • viton

    Genuine Black Viton®75 Sh-017

    19.90
    • ID X CS : 17,2 X 1,78 mm
    • Used for Regulator piston ring and cap; Dacor HP module
    • Scubapro part no 01.050.395
    • Qty : 50 O-rings
  • viton

    Genuine Black Viton®75 Sh-019

    19.90
    • Qty : 50 O-rings
    • ID X CS : 20,3 X 1,7 mm
    • Used for Healthway / USD / Sherwood industrial piston regulator.
  • viton

    Genuine Black Viton®75Sh- 014

    15.45
    • Qty : 50 O-rings
    • ID X CS : 12,4 X 1,7 mm
    • Used for Std. Yoke Regulator/K-Valve;+ 2nd stage inlet fittings; J-regulators; Common in aluminum cylinder valve to yoke regulator.
1 2 3 4